Turbo Dodge Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 465 Results
  1. Cars Wanted
    Putting a feeler out, wanting to buy a 1987 Lebaron Conv/Coupe/wagon or Mid 80s Turbo New Yorker. Here's the catch, MUST HAVE VOICE ALERT (EVA). The more digital features, the better (im aware of them getting older and more unreliable. Must be running and driving. A tiny bit of rust here or...
  2. FAQ Section
    My son and I recently bought a 1987 Dodge Daytona Shelby Z and while restoring it here are some of the common problems and the way we resolved them which could help others. These can be applicable for 1987-1989 Daytona Shelby Z and possibly other years and Chrysler/Dodge models. Engine Head...
  3. Parts For Sale
    Newly rebuild HE351CW. Turbine housing ported to match T3 outlet. Wastegate port ported to reduce creep. Polished Compressor housing lightly ported to remove casting flaws. Billet aluminum compressor wheel. New command valve. Located in Luzerne, PA. 18709 Shipping on buyer’s dime. $550 $475
    $475 USD
  4. Engine - General, Exhaust & Induction
    Basically all I’m trying to figure out is on the wastegate, Is when the car is off, where does the waste gate sit? Is it open? Or closed? 85/87. If it’s different, give me both
  5. Engine - Turbo & Block
    So, FWD Performance lost my TII in the mail. The woman who manages the phones sent over a Mitsubishi turbo that she claims "is the exact same except for the coolant port size" Which it might be the upgraded one they have listed on their site, the one thats upgraded to 30% more flow Did we get...
  6. Project Log
    So awhile back i got a 1986 charger off of a buddy of mine. The car is in pretty good shape needs to be painted but i also got an old race motor he had. the motor is out of a 1990 shadow the VNT motor he says. he already had a lot of work and money in it i plan on going through and rebuilding...
  7. Project Log
    So awhile back i got a 1986 charger off of a buddy of mine. The car is in pretty good shape needs to be painted but i also got an old race motor he had. the motor is out of a 1990 shadow the VNT motor he says. he already had a lot of work and money in it i plan on going through and rebuilding...
  8. Engine - Turbo & Block
    First time posting in a forum so I apologize in advance. I just bought this rampage in almost mint condition with a matching sportsman camper shell from my ex’s father, the original owner ran the service dept for a dodge dealership and only used mopar parts, and the second owner (my ex’s dad)...
  9. Engine - Turbo & Block
    I’m buying a Turbo 2 intake and it’s out of 90’ VNT turbo Daytona 2.2 I believe. Would it bold onto a turbo 1? Is the exhaust manifold different from the Turbo 1? Would I need all the turbo, the intake and exhaust? Can I use a Turbo 2 intake with a turbo 1 exhaust? Thanks
  10. Exterior
    So.. I'm going to pick up louvers alongside some other stuff and was wondering if someone could tell me the size of the back glass so I can see if it would fit in the car.. The Dakota is down as of right now due to a fuel injector leak and I'm not sure I trust it on a long drive. If someone had...
  11. Turbo Dodge Help
    Just picked up this 87 GLHS and needed some help with part numbers. She used to be drag raced back in the day and has some sweet date 2 parts on it like a new computer, throttle body, performance intake, etc. The turbo spun a bearing and I was curious what the part number for the turbo is? Also...
  12. Engine - Turbo & Block
    I have a 1987 shelby csx-t, and I desperately need a new Garrett TII turbo for it. Please contact me with any offers at holden_17@outlook.com.
  13. Turbo Dodge Help
    The wastegate actuator and solenoid is bad on my 89 TII. Is there any new replacement i can buy or just find something generic and make it work? If its something generic what would you recommend? Thanks!
  14. Project Log
    In spring of '21 I got a bug to search for a DTC (Dodge Turbo Car). There was nothing specific I had in mind, just to find a solid DTC for under 5K. At the time I was living in Kennewick, WA. The search began on CL, and I also would look on FM. Of course, there was not much for sale, and the...
  15. Engine - Turbo & Block
    I'm attempting to turbo a 318 and i've searched everywhere far and wide for a guide and nothing. it's currently in a 1995 dodge dakota with Multi Port Fuel Injection, and im wondering who sells a kit or who i can pay to make piping/manifolds for the job, or if you guys have any other...
  16. Dodge Vehicle Related
    Newly installed: Cylinder head & gaskets Water pump & timing belt Cap, rotor, wires, & plugs Brake calipers, rotors, pads, and complete brake lines Gas tank, fuel pump assembly & sending unit, straps Tires Engine is great, turbo may have a leak. Drives well. Could use new top, heat/AC is hit...
  17. Engine - Turbo & Block
    hey new to posting on this thread, I have a stock 1989 dodge w150 with a 318 tbi, was wondering if anyone could help me with what I need to add a small turbo only pushing 5-10 psi, trying to do it on a cheaper budget for now and maybe upgrading it later
  18. Engine - Turbo & Block
    Lookin for parts, 1991, Dodge Daytona 2.5L, Manual, Need all air ducts/air filter please. I have checked mopargiants.com and airizona parts. Thanks if you can help.
  19. Omni Cars + Parts
    Lots of turbo dodge and horizon parts, here’s a short list of what I know I have T-1 engine complete with head only thing missing is pistons and con rods 87 horizon motor, complete and ran like a top before I began my swap only issue is carb ran a little rich -water pump -Omni/horizon...
  20. 84 dodge daytona turbo z

    I recently picked this up from my ladies uncle who passed. Its been sitting in his garage for a lot of years. I didnt get to meet him so I don't know any history about it. There is almost no rust anywhere on the car with none on the body. Crazy for coming from Michigan. The engine is torn apart...
1-20 of 465 Results
Top