Srt/2.4 swap in l-body - Turbo Dodge Forums : Turbo Dodge Forum for Turbo Mopars, Shelbys, Dodge Daytona, Dodge SRT-4, Chrysler PT Cruiser, Omni and more!

2.4l Turbo Discussion of the 2.4l turbo

 
LinkBack Thread Tools
post #1 of 8 Old 02-01-2018, 11:15 PM Thread Starter
Garrett Booster
 
Join Date: Jun 2008
Location: hartselle,al
 
My Ride: 86 shelby charger
Engine: 2.2
Induct: Turbo
1/4: 0.000

Posts: 175
Thanks: 0
Thanked 0 Times in 0 Posts
 
Srt/2.4 swap in l-body

It's been a while since I've been on here and finally decided on duel Cam head swap and started looking into it again and notice the conversion timing gears are not available from fwd or TU anymore (can't remember who had them... It's been a while) so then I decided I'll just swap the whole motor. Need to put magasquirt on it any since I finally figured out alot my problems is in the injection harness and those stupid solenoids on the passenger fender. I have the hybrid t3/t4 small housing turbo from fwd and would have for it sit around and not get used, so my question which exhaust housing can I change it to to work with the other flange? And/or what it's the best way to adapt the passenger side motor mount and the front
shelby3322 is offline  
Sponsored Links
Advertisement
 
post #2 of 8 Old 02-02-2018, 09:19 AM
TD is love, TD is life
 
Join Date: Apr 2004
Location: Mesa, AZ.
 
Engine: 2.2
Induct: Turbo
1/4: 0.000

Posts: 13,378
Thanks: 0
Thanked 0 Times in 0 Posts
   
Re: Srt/2.4 swap in l-body

Quote:
Originally Posted by shelby3322 View Post
so my question which exhaust housing can I change it to to work with the other flange?
https://agpturbo.com/srt-4-agp-cast-t3-manifold/


Quote:
Originally Posted by shelby3322 View Post
And/or what it's the best way to adapt the passenger side motor mount and the front
Measure, cut, then weld.
tryingbe is offline  
post #3 of 8 Old 02-03-2018, 05:27 PM Thread Starter
Garrett Booster
 
Join Date: Jun 2008
Location: hartselle,al
 
My Ride: 86 shelby charger
Engine: 2.2
Induct: Turbo
1/4: 0.000

Posts: 175
Thanks: 0
Thanked 0 Times in 0 Posts
 
Ok... But I was meaning the turbine housing itself, the hot side, to change the Chrysler flange to the t3 to bolt it to the proper exhaust manifold
shelby3322 is offline  
Sponsored Links
Advertisement
 
post #4 of 8 Old 02-03-2018, 07:37 PM
TD New Guy
 
Join Date: Apr 2016
Location: Jamestown, Pennsylvania
 
My Ride: MS3
Engine: 2L I-4
Induct: N/A
1/4: 0.000

Posts: 115
Thanks: 0
Thanked 0 Times in 0 Posts
 
Re: Srt/2.4 swap in l-body

You might be able to drill the turbine housing inlet flange to normal t3 spec. Lay a template of the t3 bolt pattern on and see where you're at, might require some work on the flange's backside so that the fasteners are against a flat surface.
CatchaCuda is offline  
post #5 of 8 Old 02-04-2018, 01:17 AM
TD is love, TD is life
 
Join Date: Apr 2004
Location: Mesa, AZ.
 
Engine: 2.2
Induct: Turbo
1/4: 0.000

Posts: 13,378
Thanks: 0
Thanked 0 Times in 0 Posts
   
Re: Srt/2.4 swap in l-body

Sell the Chrysler turbine housing or the entire turbo.
tryingbe is offline  
post #6 of 8 Old 02-04-2018, 04:55 PM
TD Extreme User!
 
Join Date: Sep 2007
Location: Austin, TX
 
My Ride: 2017 Subaru WRX
Engine: 2.0l Boxer Turbo
Induct: Turbo
1/4: 0.000

Posts: 4,819
Thanks: 0
Thanked 0 Times in 0 Posts
 
Re: Srt/2.4 swap in l-body

You can usually find a nice T3 housing from a Ford turbo car. I actually have a .48 housing sitting in the garage, which i have used to swap a Chrysler turbo over to a Ford T3 housing. Just hunt around eBay or craigslist to see if there are any local.
1983Rampage is offline  
post #7 of 8 Old 02-05-2018, 10:17 AM Thread Starter
Garrett Booster
 
Join Date: Jun 2008
Location: hartselle,al
 
My Ride: 86 shelby charger
Engine: 2.2
Induct: Turbo
1/4: 0.000

Posts: 175
Thanks: 0
Thanked 0 Times in 0 Posts
 
Do u guys think this will work? What I have is a turbonetics turbo.

http://www.treadstoneperformance.com...rbine+Housings
shelby3322 is offline  
post #8 of 8 Old 02-06-2018, 05:22 PM
TD New Guy
 
Join Date: Apr 2016
Location: Jamestown, Pennsylvania
 
My Ride: MS3
Engine: 2L I-4
Induct: N/A
1/4: 0.000

Posts: 115
Thanks: 0
Thanked 0 Times in 0 Posts
 
Re: Srt/2.4 swap in l-body

I'd recommend TU, they sell new ford (standard) t3 housings. They really help support and advance our cars.
CatchaCuda is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Turbo Dodge Forums : Turbo Dodge Forum for Turbo Mopars, Shelbys, Dodge Daytona, Dodge SRT-4, Chrysler PT Cruiser, Omni and more! forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome