General information parts list and threads for 16V Conversions - Turbo Dodge Forums : Turbo Dodge Forum for Turbo Mopars, Shelbys, Dodge Daytona, Dodge SRT-4, Chrysler PT Cruiser, Omni and more!
16v Conversion Converting to 16V status

 
LinkBack Thread Tools
post #1 of 2 Old 01-28-2005, 09:57 PM Thread Starter
Level 2 Supporter
 
Join Date: Jan 2003
Location: Isle De Muerta (Perryopolis PA)
 
My Ride: The Black Pearl
1/4: 0.000

Posts: 2,297
Thanks: 0
Thanked 0 Times in 0 Posts
   
General information parts list and threads for 16V Conversions

After seeing all the people interested in doing 16V swaps, and the constant recurring questions, I felt the need to compile this list of information and links. First, is the most complete list of items you will need to complete the swap that I could come up with. I hope I have included everything, but undoubtedly I have forgotten something.
The info listed is mostly listed on Kevin's (OZspeed) site.

Secondly are a list of websites covering information on performing a 16V conversion. Again if I have left anyone out, I apologize, but this list was made in haste, and I only covered the sites I could find easily.

Lastly are the links to important threads her ein the 16V section. There are many important threads here that you will find valuable if you are performing a 16V conversion. READ THEM.

I sincerely hope that this helps guide anyone considering a 16V conversion.

Heath Farquhar

16V conversion parts list:

1989 2.5 block with venolia forged pistons, fresh rebuild bottom end, all new components minus rods.

2.0 or 2.4 dohc head complete
VW superV head studs# is 204-4202 (arp) or FWD 88-0661 (fwd performance)
www.jgstools.com/turbo stage 2 turbo header (Hope it give me enough room in the L body)
FWD performance Cam gears PN FWD 88-0658
Loctite 620
T249 Timing belt FWD 88-0662
MLS neon Headgasket
3 steel plugs .695" to .700", 3/4" long
2 steel plugs .350", 3/4" long
2 dowel pins PN 4448856
1 Aeroquip -12AN to 1/2NPT straight
1 Aeroquip -4AN to 1/8NPT straight
3 .550 Aluminum plugs, 1/2" long
1 Aeroquip -8AN to 3/8NPT straight
1 Aeroquip -12AN to 1/2NPT straight
1 Aeroquip -4AN to 1/8NPT 90 degree
1 Aluminum 3/8"NPT Hex Head plug
t1 fuel rail
caravan fuel rail
intake manifold off of a '99 Caravan with a 2.4
Magnecore 8.5mm Plug wires FWD 88-0657


Websites for performing the 16V conversion:


Kev's Conversion Website
http://home.comcast.net/~ozspeed/

FrankNBeans
http://www.franknbeans.com/hybrid.html

Russ Jerome
http://hometown.aol.com/russjerome/

Unknown
http://www.members.aol.com/mopartek/hybrid.html

Scott
http://www-unix.oit.umass.edu/~sdean...ybrid_page.htm

Threads in the 16V conversion section of importance:

Oil restrictor for head:
https://www.turbododge.com/forums/showthread.php?t=44944

Custom intake thread:
https://www.turbododge.com/forums/showthread.php?t=39800

Block and head plug info:
https://www.turbododge.com/forums/showthread.php?t=45979

16V 2.2 pics&Thread:
https://www.turbododge.com/forums/showthread.php?t=49976
https://www.turbododge.com/forums/showthread.php?t=51486

Russ's Oil drain Aid:
https://www.turbododge.com/forums/showthread.php?t=57536

FFWD Hybrid Pics:
https://www.turbododge.com/forums/showthread.php?t=55525

CAM INFO Neons.Org
http://neons.org/forums/viewtopic.php?t=85824

Neon Head Oiling:
https://www.turbododge.com/forums/showthread.php?t=67461

Part numbers for aeroquip parts

1 Aluminum 3/8"NPT Hex Head plug FCM3687
1 Aeroquip -12AN to 1/2NPT straight FCM2010
1 Aeroquip -4AN to 1/8NPT straight FCM2001
1 Aluminum 3/8"NPT Hex Head plug
1 Aeroquip -8AN to 3/8NPT straight FCM2007
1 Aeroquip -12AN to 1/2NPT straight FCM2010
1 Aeroquip -4AN to 1/8NPT 90 degree FCM2031

I also went to Scott D'Andre's webpage and looked up the part numbers for the fittings he used.

2 - 12an to 3/4" npt straight adapters (for the oil return to the block) FCM2011
1 - 10an to 1/2" npt straight adapter (for the oil return from the turbo) FCM 2009

3 - 3/8" npt aluminum/stainless steel square head plugs (plug the oil return holes in the head) FCM3687
1 - 4an to 1/8" npt 90 adapter (taps into the side of the head to feed oil into the head) FCM2031
1 - 12an to 3/4" npt 45 adapter (for head) FCM2025
1 - 12an to 3/4" npt straight adapter (1 for the head 2 for the block) FCM2011

For the Oil Lines:
1 - 12an straight hose end (connects to the 12an to 3/4" npt 45 adapter for the external oil return from the head to the block) FCM1015
1 - 12an 45 swivel hose end (opposite end of the hose w/ the straight hose end) FCM4025
2 - 12an 90 swivel hose ends (both on the same hose for the 2nd external oil return from the head to the block) FCM4035

1 - 3' section of 12an braided line FCA1203
1 - 3' section of 10an braided line FCA1003
1 - 3' section of 4an braided line FCA0403

1 - 4an to 1/8" npt 90 adapter (turbo feed: screws into the oil inlet of the turbo) FCM2031
2 - 4an to 1/8 npt 45 adapter (turbo feed: taps into the oil distribution block, Oil supply for the head: feeds oil to the head) FCM2021
1 - 10an to 1/2 npt 90 adapter (taps into the oil return adapter) FCM2039

Thes part numbers are for individually packaged parts in anodized blue. For bulk packaged parts the second letter becomes a 'B' instead of a 'C'. Nickel plated parts have an 'E' instead of the 'M'.

TURBODODGE PIRATE! Type ARRRRRGH

1999 Neon RT Mod Happy
Steelcities DSP champ 2002
1987 Shelby Charger 2.4 DOHC HY35Turbo NVT350 Tranny OBX TBD equipped OOH YEAH!
1991 Blazer T10 4.3L Still rusting. Now with rusty and leaking brake lines!!

Steelcities SDAC Secretary
Contributing member Turbododge Axis of Evil

Last edited by oldgregg; 03-07-2005 at 11:42 PM.
Kid Doc is offline  
Sponsored Links
Advertisement
 
post #2 of 2 Old 01-17-2006, 08:58 PM
TD Hardcore User!
 
Join Date: Jan 2003
Location: Milw. WI
 
My Ride: No slicks Omni
Engine: 2.2
Induct: Turbo
1/4: 12.036

Posts: 2,811
Thanks: 0
Thanked 0 Times in 0 Posts
         
And more related links:

http://www.juxsa.com/carstuff/16v/16v.htm

http://www.geocities.com/shelby16v/?200617

Mike's updated link:
http://www.maximumpsi.com/hybrid.html

Off the shelf Hybrid parts like sprockets,pistons,wires ect:
http://www.fwdperformance.com/store/...Catalog=Hybrid 16V Neon

Cam sprocket options from Larry:
https://www.turbododge.com/forums/sho...ears+sprockets

Cam sprocket options from Whywoody:
https://www.turbododge.com/forums/sho...=107721&page=2
2nd page, a20a Honda sprockets, 12v SOHC of 88-89 vintage.

Plug wire options:
Autolite 96517, older toyota v-6, have to modify dist end with
your present 8v ends (ez).

Common problem, camshaft alignment from 2.0 to 2.4:
https://www.turbododge.com/forums/sho...light=camshaft
(Holes in cam's point up, dont look at keyway/dowl)

2.5 STOCK BLOCK/PISTONS WILL ACCEPT THE 2.0/2.4 HEAD.
2.2 STOCK BLOCK/PISTONS WILL NOT ACCEPT HEAD UNLESS
PISTON MODIFICATION ARE MADE (HYBRID PISTONS ARE
AVAILABLE THRU OUR VENDORS). VALVE CLEARANCE IS THE
ISSUE.

DO NOT USE AN 8V HEADGASKET FOR HYBRID, ONLY
USE A DOHC 2.0/2.4 GASKET. NEVER SEEN A NON
MLS (multi layer steel) BUT AS LONG AS IT IS DESIGNED
FOR THE NEON/STRATUS YOUR GOOD.

Last edited by russ jerome; 12-05-2006 at 06:15 PM.
russ jerome is offline  
Sponsored Links
Advertisement
 
Closed Thread

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Turbo Dodge Forums : Turbo Dodge Forum for Turbo Mopars, Shelbys, Dodge Daytona, Dodge SRT-4, Chrysler PT Cruiser, Omni and more! forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome