Join Date: Feb 2003
Location: Birmingham AL
My Ride: Dakota QC
Engine: 4.7 V8
Thanked 0 Times in 0 Posts
Update,,,the only problem I've had so far in the area where the alt tension bracket is, I had to remove alot of metal off the bracket because the IC tube points right into the bracket. It works OK for now,,I used some pvc plastic pipe and some hard rubber 90 degree elbows from V6 TB to airbox cars.
Right now the pipe from the IC to the TB is coming up from behind the fan at about a 45 degree angle. I might try to work it across the bottom then up to the TB.
I had to remove some sheet metal on each side of the rad/AC condensor area, the AC condensor moved the right just fine and I'm using a Daytona T2 rad,,my GLHS rad sprung a leak..
02' QC Dakota 4.7