Throttle pressure cable connect 2.2l - Turbo Dodge Forums : Turbo Dodge Forum for Turbo Mopars, Shelbys, Dodge Daytona, Dodge SRT-4, Chrysler PT Cruiser, Omni and more!
Engine Management, Fuel, Spark, EGTs, and Air/Fuel Ratios This forum includes general electrical, modification, tuning, repair, replacement, identification and restoration of all components mentioned above including SMEC, SBEC, Logic Modules, aftermarket engine management, etc. Nitrous oxide posts go in here. This is the place

 
LinkBack Thread Tools
post #1 of 6 Old 08-09-2019, 10:33 AM Thread Starter
TD New Guy
 
Join Date: May 2019
Location: shasta lake, ca.
 
My Ride: 82 rampage
Engine: 2.2L
Induct: N/A
1/4: 0.000

Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
 
Throttle pressure cable connect 2.2l

I just finished the swap of a manual to auto. on my 82 rampage. trans shifter all connected and working. I cannot see where the throttle pressure cable connects to the holley 6520 carb. , I don't have the auto bracket for the two cables, I should be able to fab one. The pressure cable I have came from a 83 rampage. would someone post a photo of where it connects on the carb linkage. Thanks
jax-roxy is offline  
Sponsored Links
Advertisement
 
post #2 of 6 Old 08-09-2019, 04:02 PM
Boostaholic
 
Join Date: Sep 2017
Location: DFW area
 
My Ride: 83 Rampage Base Carb
Engine: 2.2
1/4: 0.000

Posts: 423
Thanks: 0
Thanked 0 Times in 0 Posts
 
Garage
Re: Throttle pressure cable connect 2.2l

Quote:
Originally Posted by jax-roxy View Post
I just finished the swap of a manual to auto. on my 82 rampage. trans shifter all connected and working. I cannot see where the throttle pressure cable connects to the holley 6520 carb. , I don't have the auto bracket for the two cables, I should be able to fab one. The pressure cable I have came from a 83 rampage. would someone post a photo of where it connects on the carb linkage. Thanks
Hope this pic helps!

I just got through dropping the AT pan & pulling the valve body. Too dang hot now to do anything else!
Attached Thumbnails
Click image for larger version

Name:	carb linkage1.JPG
Views:	14
Size:	124.6 KB
ID:	255019  
John83Rampage is offline  
post #3 of 6 Old 08-09-2019, 06:35 PM Thread Starter
TD New Guy
 
Join Date: May 2019
Location: shasta lake, ca.
 
My Ride: 82 rampage
Engine: 2.2L
Induct: N/A
1/4: 0.000

Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
 
Re: Throttle pressure cable connect 2.2l

john83rampage; That is exactly what I wanted to see. I can see that I have the wrong pressure cable. It was supposed to be from an 83 rampage I can see it's not. IT took me over three weeks to swap trans due to the extreme heat here in no. ca. and I wok alone. If anyone has this cable and bracket I would be interested in buying. Thanks much
jax-roxy is offline  
Sponsored Links
Advertisement
 
post #4 of 6 Old 08-09-2019, 07:04 PM
Boostaholic
 
Join Date: Sep 2017
Location: DFW area
 
My Ride: 83 Rampage Base Carb
Engine: 2.2
1/4: 0.000

Posts: 423
Thanks: 0
Thanked 0 Times in 0 Posts
 
Garage
Re: Throttle pressure cable connect 2.2l

Just to let you know I had to take the pic with a flashlight (torch if you're a Brit) shining on the carb. The shadow of
the throttle spring is appearing on the metal tube of the throttle pressure cable (kickdown cable, detent cable).
The groove on the end of the cable slides on the carb linkage pin and then it's secured with a washer & clip.
Look at figure 14-2100 in the '82 efiche parts manual (Fuel then throttle controls M,Z 2.2). Part number for the
bracket is indicated.

RockAuto has the cable. Look under Transmission then select Detent...
John83Rampage is offline  
post #5 of 6 Old 08-09-2019, 07:34 PM Thread Starter
TD New Guy
 
Join Date: May 2019
Location: shasta lake, ca.
 
My Ride: 82 rampage
Engine: 2.2L
Induct: N/A
1/4: 0.000

Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
 
Re: Throttle pressure cable connect 2.2l

John83 Thanks again I just ordered the cable. I would never have looked at detent. rockauto is a great place to buy parts, I'v been buying from them for six years. the picture came out great. Thanks
jax-roxy is offline  
post #6 of 6 Old 08-09-2019, 08:25 PM
Boostaholic
 
Join Date: Sep 2017
Location: DFW area
 
My Ride: 83 Rampage Base Carb
Engine: 2.2
1/4: 0.000

Posts: 423
Thanks: 0
Thanked 0 Times in 0 Posts
 
Garage
Re: Throttle pressure cable connect 2.2l

Now for the bracket and "you'll be cookin' with gas" as my Grandpa used to say.

Hopefully someone here has one for you!
John83Rampage is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Turbo Dodge Forums : Turbo Dodge Forum for Turbo Mopars, Shelbys, Dodge Daytona, Dodge SRT-4, Chrysler PT Cruiser, Omni and more! forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome