1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance - Page 4 - Turbo Dodge Forums : Turbo Dodge Forum for Turbo Mopars, Shelbys, Dodge Daytona, Dodge SRT-4, Chrysler PT Cruiser, Omni and more!

Project Log Post your project logs here

 7Likes
Reply
 
LinkBack Thread Tools
post #46 of 63 Old 05-10-2019, 12:30 PM
Super Moderator


 
Dr. Johny Dodge's Avatar
 
Join Date: Apr 2010
Location: Toronto
 
My Ride: 87 Shelby Charger
1/4: 0.000

Posts: 11,571
Thanks: 0
Thanked 0 Times in 0 Posts
   
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

forget weight savings .. the front end can now actually be made "straight' without all the flexible plastic

and goodbye nose to fender seam and the pucker of the flexible nose where it presses against the front of the fender

YEA !!!

an underside of the hood pic would be interesting..

my question is how did it ship and how was it packaged??

and how long between ordering it and receiving it - or at least knowing it was ready to ship ??

(I want the charger front end , hood , back bumper and the daytona dash)
Dr. Johny Dodge is offline  
Sponsored Links
Advertisement
 
post #47 of 63 Old 05-10-2019, 12:55 PM Thread Starter
Hybrid Booster
 
Join Date: Mar 2003
Location: Merrimack, NH
 
My Ride: 1986 Turbo Z
Engine: 2.2l T3DOHC
Induct: Turbo
1/4: 0.000

Posts: 1,219
Thanks: 0
Thanked 0 Times in 0 Posts
Images: 5
 
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

Quote:
Originally Posted by Dr. Johny Dodge View Post
forget weight savings .. the front end can now actually be made "straight' without all the flexible plastic

and goodbye nose to fender seam and the pucker of the flexible nose where it presses against the front of the fender

YEA !!!

an underside of the hood pic would be interesting..

my question is how did it ship and how was it packaged??

and how long between ordering it and receiving it - or at least knowing it was ready to ship ??

(I want the charger front end , hood , back bumper and the daytona dash)
Was about three weeks. Shipping from Jacksonville FL to Merrimack NH was 2days.

Sent from my SM-G930VL using Tapatalk
turboshelbys is offline  
post #48 of 63 Old 05-10-2019, 01:31 PM
Hybrid Booster
 
Join Date: Oct 2015
Location: Alton, IL
 
My Ride: GLHS 958
Engine: 2.2 Turbo II
Induct: Turbo
1/4: 0.000

Posts: 1,006
Thanks: 0
Thanked 0 Times in 0 Posts
 
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

Cool! I saw your Facebook post yesterday. Are these the standard fiberglass pieces or are some the light weight composite? $2200 didn't seem bad at all. I want to get the composite hatch for L body for my GLHS.

-Mark Lucas
INSATANSSEAT is offline  
Sponsored Links
Advertisement
 
post #49 of 63 Old 05-10-2019, 02:05 PM Thread Starter
Hybrid Booster
 
Join Date: Mar 2003
Location: Merrimack, NH
 
My Ride: 1986 Turbo Z
Engine: 2.2l T3DOHC
Induct: Turbo
1/4: 0.000

Posts: 1,219
Thanks: 0
Thanked 0 Times in 0 Posts
Images: 5
 
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

Quote:
Originally Posted by INSATANSSEAT View Post
Cool! I saw your Facebook post yesterday. Are these the standard fiberglass pieces or are some the light weight composite? $2200 didn't seem bad at all. I want to get the composite hatch for L body for my GLHS.

-Mark Lucas
Regular fiberglass, the stuff is super sturdy too

Sent from my SM-G930VL using Tapatalk
INSATANSSEAT likes this.
turboshelbys is offline  
post #50 of 63 Old 05-10-2019, 07:29 PM
Super Moderator


 
Dr. Johny Dodge's Avatar
 
Join Date: Apr 2010
Location: Toronto
 
My Ride: 87 Shelby Charger
1/4: 0.000

Posts: 11,571
Thanks: 0
Thanked 0 Times in 0 Posts
   
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

good to know the delivery time is so short , thanks

and if anyone is looking for fiberglass parts STAY AWAY from "showcars" here near toronto
you'll never get anything..even if you paid
Dr. Johny Dodge is offline  
post #51 of 63 Old 05-10-2019, 07:31 PM Thread Starter
Hybrid Booster
 
Join Date: Mar 2003
Location: Merrimack, NH
 
My Ride: 1986 Turbo Z
Engine: 2.2l T3DOHC
Induct: Turbo
1/4: 0.000

Posts: 1,219
Thanks: 0
Thanked 0 Times in 0 Posts
Images: 5
 
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

Quote:
Originally Posted by Dr. Johny Dodge View Post
good to know the delivery time is so short , thanks

and if anyone is looking for fiberglass parts STAY AWAY from "showcars" here near toronto
you'll never get anything..even if you paid
Yeah, I was actually talking to the driver they said they're doing away with their storage places because it's so ridiculously expensive. that's why they just get stuff immediately delivered.

Sent from my SM-G930VL using Tapatalk
turboshelbys is offline  
post #52 of 63 Old 05-11-2019, 08:47 AM
- OFFICIAL GEARHEAD -

 
Shadow's Avatar
 
Join Date: Aug 2005
Location: Aubigny,MB
 
My Ride: 86 S/C
Engine: 2.2 8V
Induct: Turbo
1/4: 10.040

Posts: 2,346
Thanks: 0
Thanked 0 Times in 0 Posts
Images: 6
 
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

Quote:
Originally Posted by Dr. Johny Dodge View Post
forget weight savings .. the front end can now actually be made "straight' without all the flexible plastic
-250lbs plus best ET so far = 9's

I don't think that's forgettable.......;)
Shadow is offline  
post #53 of 63 Old 05-11-2019, 03:11 PM Thread Starter
Hybrid Booster
 
Join Date: Mar 2003
Location: Merrimack, NH
 
My Ride: 1986 Turbo Z
Engine: 2.2l T3DOHC
Induct: Turbo
1/4: 0.000

Posts: 1,219
Thanks: 0
Thanked 0 Times in 0 Posts
Images: 5
 
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

Quote:
Originally Posted by Shadow View Post
-250lbs plus best ET so far = 9's



I don't think that's forgettable.......;)
Yeah I put better gears in it too. 9's shouldn't be a problem now once I get it back up and going.

Sent from my SM-G930VL using Tapatalk
Shadow and INSATANSSEAT like this.
turboshelbys is offline  
post #54 of 63 Old 05-12-2019, 01:41 PM
Hybrid Booster
 
Join Date: Oct 2015
Location: Alton, IL
 
My Ride: GLHS 958
Engine: 2.2 Turbo II
Induct: Turbo
1/4: 0.000

Posts: 1,006
Thanks: 0
Thanked 0 Times in 0 Posts
 
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

I have one of the hairyglass hoods for Charger/O24. It is extremely light and rigid for thin glass.
INSATANSSEAT is offline  
post #55 of 63 Old 05-12-2019, 06:41 PM
Super Moderator


 
Dr. Johny Dodge's Avatar
 
Join Date: Apr 2010
Location: Toronto
 
My Ride: 87 Shelby Charger
1/4: 0.000

Posts: 11,571
Thanks: 0
Thanked 0 Times in 0 Posts
   
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

sorry for the one post thread jack...
we need to find a "charger" guy in florida

you know .. someone who could drop off a decent shelby charger airdam for them to copy

a straight rigid , one piece airdam for your shelby charger .. priceless - and possibly marketable
being they're into limited production odd ball stuff something with a small market group is what they cater to - if they know it's there I'd presume
Shadow and INSATANSSEAT like this.
Dr. Johny Dodge is offline  
post #56 of 63 Old 05-12-2019, 06:52 PM Thread Starter
Hybrid Booster
 
Join Date: Mar 2003
Location: Merrimack, NH
 
My Ride: 1986 Turbo Z
Engine: 2.2l T3DOHC
Induct: Turbo
1/4: 0.000

Posts: 1,219
Thanks: 0
Thanked 0 Times in 0 Posts
Images: 5
 
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

Quote:
Originally Posted by Dr. Johny Dodge View Post
sorry for the one post thread jack...
we need to find a "charger" guy in florida

you know .. someone who could drop off a decent shelby charger airdam for them to copy

a straight rigid , one piece airdam for your shelby charger .. priceless - and possibly marketable
being they're into limited production odd ball stuff something with a small market group is what they cater to - if they know it's there I'd presume
No problem. give them a call you'd be surprised what a phone call can do!

Sent from my SM-G930VL using Tapatalk
Dr. Johny Dodge likes this.
turboshelbys is offline  
post #57 of 63 Old 05-12-2019, 10:57 PM
Super Moderator


 
Dr. Johny Dodge's Avatar
 
Join Date: Apr 2010
Location: Toronto
 
My Ride: 87 Shelby Charger
1/4: 0.000

Posts: 11,571
Thanks: 0
Thanked 0 Times in 0 Posts
   
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

OK , ..
here I was happy just hoping I could still get a flat hood and rear bumper

ahhh .. I am so frustratingly encouraged now .. thanks for the update on your project !!

and I'm really looking forward to seeing it go together

not sure how you would think of attaching your front clip but I've figured I'd skin my fenders while still on the car

take the nose off and cut the tops , leaving enough to fit inside the top of the fiberglass fender
leave the inner support for the dogleg and very bottom of fender where it mounts to the rocker , for now
and cut down along the front corner where the nose bolts on , leaving for now the edge the nose bolted to

this keeps everything still enclosed from the rad cradle sides to the insides of each fender skin in the front corners
- and leaves a strong support knowing the fender's eventually gonna get leaned on , hard

two top strips , the brace drilled like cheese and the front inner fender "pans" can't weigh much and might get a lot done , well

and if your front end is on straight now it should help get the new one on straight even if you only end up using the fender bits for alignment as you work

now I'm thinking I could maybe actually get my hood project done while it's still nice and warm - outside , in the backyard away from everything of value

I found an exaggerated cowl scoop for a new style vette with some serious ventilation for the rad area at the front - big enough to almost be an entirely new center section of the charger hood

it's stupidly tall but I only want the top surface and part of the top most rise of the "cowl" shape to make a double layer center that I can then add my 3" mini old style pro stock dodge snorkel scoop on top of .. and make it feed to the original filter location at the end of the head - instead of the typical effort to put a big cone filter on the inner fender and get a huge pipe from it to the turbo

so think panel filter and tube more or less down from the hood to the turbo

-have a brand new discontinued accell foam filter that is almost zero resistance
bonus - I don't have to make room for the filter in my little L body if I put it up on top of the hood , sorta
I know it won't be light but better than the dead weight do nothing shelby hood

lol , yeah I did say snorkel scoop .. but it's a cute little "to scale" one for my car
(ha and after I posted last night I found a T/A scoop for a new challenger , a real mopar one , dirt cheep to boot - so forget little "prostock" scoop
Attached Thumbnails
Click image for larger version

Name:	s-l1600 (18).jpg
Views:	10
Size:	21.0 KB
ID:	254041   Click image for larger version

Name:	001 (3).jpg
Views:	11
Size:	14.8 KB
ID:	254043   Click image for larger version

Name:	sum-471200_xl.jpg
Views:	10
Size:	30.9 KB
ID:	254045  

Last edited by Dr. Johny Dodge; 05-13-2019 at 10:16 AM.
Dr. Johny Dodge is offline  
post #58 of 63 Old 05-13-2019, 11:26 AM Thread Starter
Hybrid Booster
 
Join Date: Mar 2003
Location: Merrimack, NH
 
My Ride: 1986 Turbo Z
Engine: 2.2l T3DOHC
Induct: Turbo
1/4: 0.000

Posts: 1,219
Thanks: 0
Thanked 0 Times in 0 Posts
Images: 5
 
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

Quote:
Originally Posted by Dr. Johny Dodge View Post
OK , ..

here I was happy just hoping I could still get a flat hood and rear bumper



ahhh .. I am so frustratingly encouraged now .. thanks for the update on your project !!



and I'm really looking forward to seeing it go together



not sure how you would think of attaching your front clip but I've figured I'd skin my fenders while still on the car



take the nose off and cut the tops , leaving enough to fit inside the top of the fiberglass fender

leave the inner support for the dogleg and very bottom of fender where it mounts to the rocker , for now

and cut down along the front corner where the nose bolts on , leaving for now the edge the nose bolted to



this keeps everything still enclosed from the rad cradle sides to the insides of each fender skin in the front corners

- and leaves a strong support knowing the fender's eventually gonna get leaned on , hard



two top strips , the brace drilled like cheese and the front inner fender "pans" can't weigh much and might get a lot done , well



and if your front end is on straight now it should help get the new one on straight even if you only end up using the fender bits for alignment as you work



now I'm thinking I could maybe actually get my hood project done while it's still nice and warm - outside , in the backyard away from everything of value



I found an exaggerated cowl scoop for a new style vette with some serious ventilation for the rad area at the front - big enough to almost be an entirely new center section of the charger hood



it's stupidly tall but I only want the top surface and part of the top most rise of the "cowl" shape to make a double layer center that I can then add my 3" mini old style pro stock dodge snorkel scoop on top of .. and make it feed to the original filter location at the end of the head - instead of the typical effort to put a big cone filter on the inner fender and get a huge pipe from it to the turbo



so think panel filter and tube more or less down from the hood to the turbo



-have a brand new discontinued accell foam filter that is almost zero resistance

bonus - I don't have to make room for the filter in my little L body if I put it up on top of the hood , sorta

I know it won't be light but better than the dead weight do nothing shelby hood



lol , yeah I did say snorkel scoop .. but it's a cute little "to scale" one for my car

(ha and after I posted last night I found a T/A scoop for a new challenger , a real mopar one , dirt cheep to boot - so forget little "prostock" scoop
That's a whole lot of words, we just simple folk here, LOL

Sent from my SM-G930VL using Tapatalk
turboshelbys is offline  
post #59 of 63 Old 05-13-2019, 11:54 AM
Super Moderator


 
Dr. Johny Dodge's Avatar
 
Join Date: Apr 2010
Location: Toronto
 
My Ride: 87 Shelby Charger
1/4: 0.000

Posts: 11,571
Thanks: 0
Thanked 0 Times in 0 Posts
   
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

that'd be the frustrated motivation and enthusiasm you provoked...
(want it now factor)
like I said much thanks - seriously -
Dr. Johny Dodge is offline  
post #60 of 63 Old 05-13-2019, 12:22 PM Thread Starter
Hybrid Booster
 
Join Date: Mar 2003
Location: Merrimack, NH
 
My Ride: 1986 Turbo Z
Engine: 2.2l T3DOHC
Induct: Turbo
1/4: 0.000

Posts: 1,219
Thanks: 0
Thanked 0 Times in 0 Posts
Images: 5
 
Re: 1986 Dodge Daytona Turbo Z T3 DOHC Tuned at FwdPerformance

Quote:
Originally Posted by Dr. Johny Dodge View Post
that'd be the frustrated motivation and enthusiasm you provoked...
(want it now factor)
like I said much thanks - seriously -


Sent from my SM-G930VL using Tapatalk
turboshelbys is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Turbo Dodge Forums : Turbo Dodge Forum for Turbo Mopars, Shelbys, Dodge Daytona, Dodge SRT-4, Chrysler PT Cruiser, Omni and more! forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome