TD New Guy
Join Date: Jul 2019
Thanked 0 Times in 0 Posts
Re: H-Body (Lancer/GTS) Window part needed
That last sheet is FANTASTIC info and I hope others who are trying to do this can locate that on here in the future. I only had the shop manl. info and it was SORELY lacking in my opinion. I wish I had this write up, it answers a LOT of missing answers in the book.
So, I'm not sure if this will make sense before I submit pictures (I'll try to get to them this Sunday when I'm off again) but the part I'm looking for isn't included or shown in ANY of the diagrams involved. In fact, I sat and scratched my head for quite a while trying to figure out how this could possibly work. I then decided to feel around in the bottom or the door and found this "roller" that had fallen off (as it will continue to do if I can't replace it)
In step 7 the "knuckle" on the end of the flex track is the part this roller will fit into. IF there was a step 8 it would talk about how to fit the roller into the knuckle.
Also, anyone parting out a Lancer/GTS, PLEASE let me know as I'm sure there's other parts I'll need for both of my cars. I'll go ahead and post another listing for a couple things I know I need.
I hope this helps someone else, and if you're doing this fix, and still have questions after reading the GREAT doc (#3 above) feel free to drop me a line, I've learned a LOT! :)