Turbo Dodge Forums : Turbo Dodge Forum for Turbo Mopars, Shelbys, Dodge Daytona, Dodge SRT-4, Chrysler PT Cruiser, Omni and more! - Reply to Topic

Engine - General, Exhaust & Induction Topics about the general engine items, exhaust system discussed here & Improving the intake tract - air filter to intake valve.

Thread: Distributor not rotating Reply to Thread
Title:
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :
Post Icons
You may choose an icon for your message from the following list:
 
   

Register Now



In order to be able to post messages on the Turbo Dodge Forums : Turbo Dodge Forum for Turbo Mopars, Shelbys, Dodge Daytona, Dodge SRT-4, Chrysler PT Cruiser, Omni and more! forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
08-09-2019 03:38 PM
jimmytroy
Re: Distributor not rotating

Quote:
Originally Posted by jimmytroy View Post
congrats on an easy fix
Or, not...do the pulleys turn now?
08-09-2019 07:50 AM
NAJ
Re: Distributor not rotating

Is it fixed???
08-08-2019 10:28 PM
jimmytroy
Re: Distributor not rotating

congrats on an easy fix
08-08-2019 05:07 PM
zuke
Re: Distributor not rotating

I finally removed all the parts in the timing belt area. Yeah the belt had teeth stripped off in areas and the more I cranked the engine
troubleshooting the other day the more teeth fell off because eventually no pulleys would turn. Thanks to everyone for all your help and advice it helped out greatly!
08-07-2019 08:05 AM
NAJ
Re: Distributor not rotating

Or to give you the "Readers Digest" version.

If the belt teeth are not stripped remove the belt and turn the Intermediate Shaft by hand and look to see if the Oil Pump Shaft is turning.

Attachment 254999

Attachment 255001
08-07-2019 07:32 AM
yellonoma
Re: Distributor not rotating

Quote:
Originally Posted by zuke View Post
The timing belt is not broken and all the pulleys rotate when the engine turns over, I haven't checked to see if the teeth are stripped on the belt yet, but if the pulleys rotate that kind of rules out stripped belt teeth. Is there a key on the shaft holding on the pulley for the shaft that rotates the distributor, maybe that broke away or something. I will pull the belt and pulley and check.
If your pulley rotates for the intermediate (I-)shaft (one that operates the distributor and oil pump) then only two possibilities are left.

Key sheared for the I-shaft to pulley

or

I-shaft is broken

I am leaning toward the broken I-shaft because with the distributor removed there is not much load on the I-shaft, and just friction of the pulley on shaft should still rotate the distributor slot. A broken shaft wouldn't.

Not great news either way, because then you had a brief period of oil starvation due to the oil pump not running as well.

The cause of a sheared key or broken shaft would be I-shaft bearing failure.
08-06-2019 07:26 PM
Dr. Johny Dodge
Re: Distributor not rotating

it's likely the teeth have striped off the belt and it's slipping

if you've removed the lower half of the timing cover and can see the pulley for the dist shaft actually turning then you could have a much larger problem

that slot that drives the distributor IS the top of the oil pump drive gear
there's a gear on the intermediate shaft that turns the pump & distributor

on some of the newer cars that gear has proven to be a problem as they strip the gears

it could also be as simple as your timing belt tensioner has come loose and is allowing the belt to slip
08-06-2019 07:16 PM
tryingbe
Re: Distributor not rotating

There is a key for all the pulley, but I doubt it.
08-06-2019 06:49 PM
zuke
Re: Distributor not rotating

The timing belt is not broken and all the pulleys rotate when the engine turns over, I haven't checked to see if the teeth are stripped on the belt yet, but if the pulleys rotate that kind of rules out stripped belt teeth. Is there a key on the shaft holding on the pulley for the shaft that rotates the distributor, maybe that broke away or something. I will pull the belt and pulley and check.
08-06-2019 10:18 AM
Dr. Johny Dodge
Re: Distributor not rotating

a jack and a block of wood are good but the mount does not have to come out

the alternator / a-c bracket does however and it uses some of the mount hardware to hold it on at the end of the block

as far as the mount goes you only need remove the two bolts holding it to the frame rail and raise the end of the motor enough to slip the belt under

you are going to have to remove the big nut facing forward on the arm of the passenger mount assembly along with the two nuts that hold an L shaped bracket and the alternator/a-c bracket

having these three nuts off the mount and needing to raise it are the reason for the block and jack

though I've done it with a 1/2 socket extension and a couple of thick towels

slip the extension through the open part of the mount
wrap rag around each end for hand protection incase things slip and grunt real hard
while a helper slips the belt under

on the side of the road one might not have a floor jack ..handy

it's not so heavy as you might think

in fact I've installed headless engines with trans this way with an extension , a floor jack and a cheap old wooden mechanics creeper to use as an engine cart low enough to slide under the car through the passenger wheel well
08-06-2019 09:13 AM
NAJ
Re: Distributor not rotating

+1 on Timing Belt.

REPLACING THE TIMING BELT
https://www.turbododge.com/forums/f4...n-84-95-a.html

ADDITIONAL INFORMATION
1)Disconnect Battery Negative Cable
2)Remove All spark plugs
3)Drain the Cooling System
4)You will need to support the engine (jack and 2x4 under the oil pan) since the R/S (passenger) engine mount has to be removed.

Attachment 254975

Attachment 254977

Attachment 254979

Any problems/questions/concerns feel free to ask.
08-06-2019 07:48 AM
Jason89
Re: Distributor not rotating

The shaft that rotates the distributor is driven by the timing belt. If the distributor is not turning and it is not the actual distributor, then the timing belt is stripped or somehow the shaft is broken. I have not seen the a broken shaft before. The timing always goes first.
To change the timing belt you do not need to pull the engine.
If it is the shaft you may have to.
Once you take the old timing belt off you will be able to turn the distributor and it's shaft.


Sent from my LG-H918 using Tapatalk
08-06-2019 07:12 AM
zuke
Distributor not rotating

My engine died while on a 500 mile trip (89 Shelby Daytona 2.2 five speed). While troubleshooting the engine I found that the distributor isnt rotating. I pulled the distributor and it functions as it should. I cranked the starter and looked in the hole and the keyway doesn't turn on the shaft. My timing belt and all pulleys rotate. My questions are, is there an internal chain turning the shaft that rotates the distributor and does this repair require pulling the engine.

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome