|Topic Review (Newest First)|
|10-27-2005 10:55 PM|
|Phreakish||I've got a 1peice intake and an SRT IC on the way for my '85, can't wait! Just gotta figure out a way around that darn T1 radiator, maybe I'll just have to move the mounts and shift it over to the pass. side some - or pull the dusty 'ol GLHS rad I have outta my garage back in cali and try puttin that in I just dont see anywhere to run the drivers side connection back to the turbo or intake w/o major cutting...|
|10-24-2005 09:32 PM|
Originally Posted by Quad47
|07-11-2005 03:12 PM|
Originally Posted by The Riddler
Car is sweet, I've seen it in person.
|06-30-2005 02:59 PM|
Originally Posted by Quad47
|11-25-2004 07:23 AM|
Originally Posted by derek502
there were a couple different ALT brackets made throughout the years. Maybe a different one might give you some more clearance. It's hard to tell which one you have on there. I have the long metal one that has a long metal bolt going through it with an adjuster nut on it. I also have the kind that has a big rubber circle in the middle to adjust everything. That one im not using if you want it. Just an idea. Looks good
no you prob don't need it there, nor do you need the bumper support that bolts to the front of the car with those 4 big bolts. But im sure it will keep your airdam nice and tight.
|11-24-2004 01:50 AM|
|iloveshelbys||Yea STRforums.com is the best place.. my bro got one there a while back for his Shadow... he's almost done with the install and custom pipe work.. will tell him to take pics just so that derek502 can admire it ;)|
|10-20-2004 08:02 PM|
|Quad47||How did you make the connection on the passenger side, the one with the oval fitting, I've got one that I will be putting in my Omni GLH. I got a price from dodge for the plastic SRT-4 piece and it was close to 100.00.|
|10-16-2004 10:29 AM|
Quick thread jack...how do you post pictures with the thumbnails like that? I looked in the FAQ, but came up with only the "img" thing that is in the advanced reply section.
BTW, I like the IC, that looks REALLY nice!
|10-15-2004 08:29 AM|
look on srtforums.com or neon.org,,SRT ICs are plentiful, prices from $100-$175.
Gonna try one on my 90 Shadow ES next.
|10-15-2004 01:09 AM|
|Dave Sigman||do you have a part number for the intercooler?|
|10-14-2004 01:40 PM|
|The Riddler||that looks awesome man....have a question though. has anyone every thought about removing the tow pieces on the front bumper that are sitting in fron of the intercooler? Do they have to be there? Iw as thinking about doing it to my glhs to see how well it worked. Thanks|
|10-14-2004 01:31 PM|
Update,,,the only problem I've had so far in the area where the alt tension bracket is, I had to remove alot of metal off the bracket because the IC tube points right into the bracket. It works OK for now,,I used some pvc plastic pipe and some hard rubber 90 degree elbows from V6 TB to airbox cars.
Right now the pipe from the IC to the TB is coming up from behind the fan at about a 45 degree angle. I might try to work it across the bottom then up to the TB.
I had to remove some sheet metal on each side of the rad/AC condensor area, the AC condensor moved the right just fine and I'm using a Daytona T2 rad,,my GLHS rad sprung a leak..
|09-21-2004 12:38 AM|
|SRT403||thats bad ass man. :)|
|09-19-2004 08:06 PM|
Originally Posted by TurboZrocks
|09-19-2004 04:47 PM|
|TurboZrocks||Nice! I was thinking about going this route in my Daytona! Do you think the srt-4 cooler is better than our stock ones?|
|This thread has more than 15 replies. Click here to review the whole thread.|