Turbo Dodge Forums banner
Cancel
My #4 coolant mod.jpg
fitment mock up.jpg
My #4 coolant mod.jpg
90* speedo drive to get away from turbo
2nd Thermostat, for #4 coolant mod, it's now a manifold block.
2nd Tstat housing is a manifold block to hold fittings for turbo & heater on the back
My upper radiator hose problem solved with 1" ID heater hose
My 1st attempt at a Tstat housing for #4 coolant mod, but missing fitting for heater, so round 2 is coming.
86-89 Lancer

My #4 coolant mod.jpg

I started with a block 2.5" x 2.5" x 6" for $40 from McMaster. Then shortened it to 4" long and drilled 1.5" hole for 1 1/4 pipe and the thermostat. Then drilled & taped the bolt holes and small pipe thread holes.
Click to expand...
Report
Watch Add bookmark
There are no comments to display.

Media information

Category
Member's Categories
Album
86-89 Lancer
Added by
86-89 Lancer
Date added
View count
230
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
samsung SM-G970U
Filename
coolant mod.jpg
File size
1,000.6 KB
Date taken
Wed, 07 April 2021 11:20 AM
Dimensions
1885px x 1414px

Share this media

Top