Turbo Dodge Forums banner

Search results

1-20 of 460 Results
Advanced Search
  1. Rough Idle In Closed Loop - Mixture?

    Turbo Dodge Help
    If you used PayPal you are 99.9% protected. eBay and PayPal usually always side with the buyer these days, however... HOPE IT WORKS!!!
  2. Where Are The Stock VNT's?

    VNT & Other Turbo Vehicles
    What city? Where were this cars parked?
  3. '89 Chrysler TC, Fires but won't start

    Turbo Dodge Help
    Before breaking/destroying things post pics of what you are attempting to do/remove and we may be able to offer help, we have all been where you are at one time or another.
  4. Rough Idle In Closed Loop - Mixture?

    Turbo Dodge Help
    By the O2 voltage you posted it appears you are "stuck at center". It my be advisable to determine why (wiring/sensor/controller) before getting in to deep. It is an easy test if you can get access to a scanner, diagnostics are the same for all years. Just in case, these are from the 90 FSM, the...
  5. '89 Chrysler TC, Fires but won't start

    Turbo Dodge Help
    You are going to have to remove the airbox to get a good look at the timing window. Also, #1 piston needs to be at TDC on a compression stroke or you will 180 degrees off. Here is a pic I drew some time ago, maybe it is clearer than the factory pic.
  6. Rough Idle In Closed Loop - Mixture?

    Turbo Dodge Help
    Be sure all basics are where they should be including fuel pressure. If the O2 voltage is reading steady at .533 volts try quickly snapping the throttle open quickly a couple of times to see if the O2 voltage moves at all. Also, are you using a scanner?
  7. Will Be Gone For A Few Days

    Turbo Lounge
    Thanks, I went from 3.00 reading glasses to 1.50 reading glasses just for the computer. The eye doctor said that the stronger the reading glasses the closer you need to be to see clearly, that explains why after the surgery I had to put my face right in front of the screen using the 3.00's. Now...
  8. Daytona Steering Rack Replacement Help

    Transmission, Suspension, Brakes, Tires & Wheels
  9. Daytona Steering Rack Replacement Help

    Transmission, Suspension, Brakes, Tires & Wheels
    I can post the pages from the FSM for you on proper pump and mount replacement on Monday.
  10. Daytona Steering Rack Replacement Help

    Transmission, Suspension, Brakes, Tires & Wheels
    I have poly mounts in my car and she is all stock and a daily driver. There may have been a slight increase in harshness at idle but not enough that I even notice anymore.
  11. Daytona Steering Rack Replacement Help

    Transmission, Suspension, Brakes, Tires & Wheels
    4 years is old for brakes and depending where you live I have seen Anti-Rattle clips rust and fall of the pad in a year or two. Just do not want you to bypass something simple because you "assume" that cannot be it. If you are replacing engine mounts I would recommend 100% that you go with Poly...
  12. '89 Chrysler TC, Fires but won't start

    Turbo Dodge Help
    According to your pics you are off a couple of teeth. The only thing I did not see is when you brought #1 cylinder to TDC whether you placed the timing mark on the bellhousing at "0" which will be true TDC. You may want to verify that and then see where your cam sprocket and distributor rotor...
  13. Hello, Looking For L Body Shifter Bushings

    Parts Wanted
    Welcome To TD!!! I am moving your Thread to the "Parts Wanted" section so you will get more views and hopefully find what you are looking for.
  14. Daytona Steering Rack Replacement Help

    Transmission, Suspension, Brakes, Tires & Wheels
    You also need to check the brakes. Over the years I have seen and heard noises from the brakes that sound like the car is falling apart and all it turns out to be a loose pad or faulty mounting hardware. Verify that the anti-rattle clips/mounting hardware are all present and intact. Be sure the...
  15. '89 Chrysler TC, Fires but won't start

    Turbo Dodge Help
    Just to clarify, as of right now we know that the Ignition System and Fuel System are OK. 1)CHECKING CAM TIMING https://www.turbododge.com/threads/cam-timing-and-belt-tension-84-95-2-2-2-5l.359212/ 2)You can also check MAP/CTS/TPS calibration to rule those sensors/circuits out as a...
  16. '89 Chrysler TC, Fires but won't start

    Turbo Dodge Help
    Cranks but will not start... The "Readers Digest" version of Chryslers No Start Diagnostics. Again... If you "ASSUME" something is OK without properly testing you may move right past the problem. 1)Test NS1 - Testing For Ignition Spark and Power Feed To Coil a)Check for spark by cranking the...
  17. 86 SC no spark no fuel. I'm at a standstill.

    Turbo Dodge Help
    Let me know when it arrives, checking the coil control circuit should be listed under "no start" (NS) diagnostics but since I have never seen this book I cannot be 100% sure. The 1990 Powertrain Diagnostics Manual starts with Test NS1 which is "Testing For Spark and Power Feed To Coil". We...
  18. Coil resistance

    Electrical
    Ask and you shall receive.
  19. 86 SC no spark no fuel. I'm at a standstill.

    Turbo Dodge Help
    Those flow chart pics appear to be for a carburated car with a SCC, not an injected vehicle with an LM/PM. You bought the Chrysler Diagnostic Procedures Manual for 87 Turbo and Turbo II?
  20. 86 SC no spark no fuel. I'm at a standstill.

    Turbo Dodge Help
    The only book I was able to locate online was a 1987 Diagnostic Test Procedures which apparently covers No Start Conditions and Fault Code Diagnostics. Unfortunately my phone will not allow me to paste the link... eBay search 1987 Chrysler Diagnostic Test Procedures and scroll down to 87 2.2 L...
1-20 of 460 Results
Top