Turbo Dodge Forums banner

Search results

1-20 of 182 Results
Advanced Search
  1. Boost bleed valve

    Engine - General, Exhaust & Induction
    If the wastegate is opening, wouldn't it lower the pressure?
  2. Boost bleed valve

    Engine - General, Exhaust & Induction
    I replaced the charge temp sensor, speed sensor and half hal pickup; still can't boost more than 15 lbs. The only choice it shows is 31. Any thoughts?
  3. Boost bleed valve

    Engine - General, Exhaust & Induction
    It's a stage 4 or 5, rated for 16 or 18+
  4. Boost bleed valve

    Engine - General, Exhaust & Induction
    Fwdperformance
  5. Boost bleed valve

    Engine - General, Exhaust & Induction
    Thanks, I'm looking into it
  6. Boost bleed valve

    Engine - General, Exhaust & Induction
    Thanks, do you have any pic perhaps
  7. Boost bleed valve

    Engine - General, Exhaust & Induction
    The cel light turns on randomly an stays on, instead of only when it hits more then 14/15.
  8. Boost bleed valve

    Engine - General, Exhaust & Induction
    The car runs better after adding the vacuum block. It's basically the same as coming from the intake and splitting into the 4 hard lines, 1 line per solenoid. I think the main vacuum line from the intake now is fuel line, it's more rigid. The boost issue didn't change from before vacuum block to...
  9. Boost issue

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    I have been wondering when I needed to replace the plug wires, I have had then for a while
  10. Boost issue

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    I thought I would post a parts list, it was 08 when I completed most of the modifications so I may have of forgotten a few things... Stage 4 or 5 cal 3 bar MAP +40 injectors Aluminum fuel rail 4 wire o2 sensor 8.5 magnecor plug wires Autolite 63 sparkplugs 52mm throttle body T1 to T2 AIS/TPS...
  11. Boost bleed valve

    Engine - General, Exhaust & Induction
    I thought I would post a parts list, it was 08 when I completed most of the modifications so I may have of forgotten a few things... Stage 4 or 5 cal 3 bar MAP +40 injectors Aluminum fuel rail 4 wire o2 sensor 8.5 magnecor plug wires Autolite 63 sparkplugs 52mm throttle body T1 to T2 AIS/TPS...
  12. Boost bleed valve

    Engine - General, Exhaust & Induction
    Just curious, why would I want to attempt to sell anything to you all. I wouldn't try to sell you a toothbrush. Only one person has truly tried to be helpful.
  13. Boost bleed valve

    Engine - General, Exhaust & Induction
    1) Did not see code 45. I've only ran the. diagnostics once since the new to me harness. (Checked and rechecked) 2) Varies, turns on and at random. Off when the car starts generally and turns on later. 3) No 4) same level everytime 5) 14/15
  14. Boost bleed valve

    Engine - General, Exhaust & Induction
    I am going to explore your suggestions when I am able, as previously mentioned. If that does or does not check out I'll to the next suggestion. I can provide an entire parts list it that would be more helpful.
  15. Boost bleed valve

    Engine - General, Exhaust & Induction
    Thank you for providing helpful information. I aan not a tough love type person, just trying to fix ab ongoing issue.
  16. Boost bleed valve

    Engine - General, Exhaust & Induction
    I have found information on the 2.4 swap that is actually useful, if you claim to have any let me know. However, I am going to explore the suggestions from NAJ. Let me know if you have any actual suggestion other than insulting comments.
  17. Boost bleed valve

    Engine - General, Exhaust & Induction
    I'm not trying to be a jerk or ect, but this is my last attempt at trying to fix it correctly before I put a 2.4 in it. Take it as u may, I just want it to work correctly and do what it should do. It needs the stage 3 cam and valve seals but one issue at a time.
  18. Boost issue

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    I haven't been able to recently, but in progress. The engine harness was part of the problem, runs better and is more reliable.
  19. Boost bleed valve

    Engine - General, Exhaust & Induction
    I have the supporting modifications to run more than 15psi including: 3 bar map, computer, injectors, turbo, intercooler, ect. I keep running into the same body issue even after changing the engine harness and redoing the vaccuum lines. I am out of ideas on fixing it correctly. The codes it...
  20. Boost bleed valve

    Engine - General, Exhaust & Induction
    How do u make a bleed valve for running more than 15 psi of boost?
1-20 of 182 Results
Top