Turbo Dodge Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 25 Results
  1. Transmission, Suspension, Brakes, Tires & Wheels
    How do I use the A413 from a 1984 Rampage with a 2.5 common block? Can I swap the pump from the transmission of the common block motor?
  2. Parts For Sale
    Selling an A413 transaxle that came out of an 87 LeBaron Coupe. Worked fine, I just swapped it out for a 5 speed. Newer filter, pan and gasket. I'm advertising this complete with everything, mount bracket (powder coated red), torque converter, shifter, cables and console. $500 obo. Does NOT...
  3. Parts Wanted
    If you know of anyone selling a built 3 spd transmission (clutch packs, lock up torque converter, etc) message me. Drive train is a SRT-4 turbo to a 31TH in an 88 GLH. Need lock up T.C. and parts for drag racing. Running 12 sec 1/4 mile on a 1 tire fire at 26lbs of boost.
  4. Turbo Dodge Help
    So from what I've gathered, if I don't have external plug for a lock up solenoid, I don't have a lock up trans? Just wanna make sure, thinking about putting a new torque converter in while I have my engine out. 92 Spirit 2.5 NA 3 speed, the only plug I see going to trans is neutral safety switch.
  5. Transmission, Suspension, Brakes, Tires & Wheels
    Okay. I've had transmission problems for a while. starts in 2nd and has to be manually put back into low and shifted up. I bought the sonnex spring and bracket and installed it. got all put back together.. still starts in 2nd.. I drive it down the road and put the shifter into 2nd at around...
  6. TurboDodge Snapshots
    Ride: 1990 Dodge Daytona Shelby Color: White exterior, bordeaux interior Engine: '89 2.5l turbo I, still sporting the Mitsubishi turbo Modifications: Factory '89 Radiator/Intercooler, 255 Walbro, MBC set for 13lbs, transmission oil cooler Mileage: 194K on body and a413, about 135K on engine For...
  7. Engine - Turbo & Block
    Hey guys, Trying to figure out the best way to get an intercooler back into my GLHS. I switched out the a525 for an a413 automatic and paddle shifters. The problem is, the automatic is quite a bit larger than the 5 speed, which pretty well blocks the bottom IO on the stock intercooler. I've...
  8. Transmission, Suspension, Brakes, Tires & Wheels
    I have an 88 Lebaron turbo and it needs suspenion badly. Figured seeing how i want to stiffen it up anyway, might as well rob the suspension pieces from another J-body but a GTC. Does anyone know if I'm going to be living in a nightmare trying to dop this? Cuz in my mind it should go smoothly...
  9. Transmission, Suspension, Brakes, Tires & Wheels
    Hello, I am currently rebuilding a 1986 Shelby Omni that is projected to put out around 300hp. I am putting a 3-speed automatic a413 into the car because I drive with hand controls. That being said, what is the best way to rebuild the a413 to ensure that it will not crumble behind the 300hp...
  10. Turbo Dodge Help
    I would like to buy inline transmission filter (magnefine) and the ebay seller sells them in 3/8, 5/16 and 1/2 diameters. So I would like to know the noses cooling diameters. Thanks Louis
  11. Parts For Sale
    i purchased the trans from velorossa a few months ago for my 86 daytona but have decided to go another route with the car trans hasnt even been installed into my car below is what velorossa had done to the trans im looking for same price as him comes with the converter asking same price...
  12. Parts For Sale
    all right first up is my A413 trans. spyder gears blew the whole diff cluster is no good blew a hole into bell housing valve body is good along with all the other parts. comes in AS SEEN condition parts in pic is everything no brackets no cables NO price listed because more then willing to rip...
  13. Transmission, Suspension, Brakes, Tires & Wheels
    Hello, I would like to know if I can replace an A413 trans (1989 2.5L turbo) with a neon one. Is this trans a direct bolt in ? Can it handle more horsepower than my trans ? Thanks
  14. Parts Wanted
    im looking for a working A413 for my daytona for 300 or under local to 12589 or 300 max shipped thank you
  15. Transmission, Suspension, Brakes, Tires & Wheels
    Hi guys I'm just new here so don't bash me for asking a newbie question. I have a motor and trans that came from an 89 Turbo Van that we chopped up 3 years ago. I am just wondering if the internals of the Turbo Version A413 transmission could be installed to the A470 which of course is mated...
  16. Board Discussion
    I hate to bash, I hate to have to talk about other's work, but this has become so frustrating I figured I'd save the headaches for everyone else. I have heard mixed things about MRX Motors, a lot of people say he's expensive, but the quality is good, some say it takes ages to hear from him. This...
  17. Transmission, Suspension, Brakes, Tires & Wheels
    Hey, I just purchased an 89 voyager turbo with the a413 (110k miles, was a 1 owner grandpas car). I want to beef up the trans before i touch the engine. I have read alot about what can be done to the transmission, But what modifications can be done to it while it is in the car? I plan on a new...
  18. Parts Wanted
    i still really need this tranny i have the money just a matter of finding the trans if you got one let me know please
  19. Transmission, Suspension, Brakes, Tires & Wheels
    I have a 1992 Dodge Daytona IROC 2.5L Turbo, with a 3 speed A413 transmission. The transmission was slipping, decided to replace the filter and fluid because the fluid was a gross color, found this broken piece in the bottom of my pan with some other metal shavings and what appeared to be roller...
  20. Transmission, Suspension, Brakes, Tires & Wheels
    I posted this in general section but I figured it would be better here since I need trans info... I'm a complete noob to these cars and may buy this one... only pic: I have not seen the car in person but it's a 1986 CS turbo I with only 88k miles. It's only $1200 but with an AUTO trans. I spoke...
1-20 of 25 Results