Turbo Dodge Forums banner

bov

  1. Tial or Synapse bov?? Anyone running either one?

    New Member Intros
    I'm new here and I'm having trouble finding info on either one of these bov. I have narrowed my decision down to the Tial 50mm and the Synapse. And I don't want a knock off from Ebay. Any opinions or recommendations are appreciated. I have an 89 Daytona Shelby 2.2 TII. I have had the engine...
  2. Connecting rods

    Engine - Turbo & Block
    was wondering what the best value on connecting rods are for and 85 2.2L. I was thinking about going with the Forged Wiseco Pistons from turbosunleashed.com I also wouldn't mind some input on BOV's you guys are running. Its going from t1 to t2, I'm not sure how much boost I'll wanna run but if...
  3. Bov installation help!!

    Turbo Dodge Help
    so i just got a after Market BOV for my 92 dodge daytona 2.5 turbo and im triyng to figure out with sizing pipes i need to go from my turbo small side to my throttle body. I found it on here one time and i cant find it now... i need the angles of pipe an the step downs an up sizes i need to buy...
  4. Dual port bov on a turbo one??? Please chime in.. :)

    Engine - General, Exhaust & Induction
    1987 Dodge Daytona Pacifica 2.2 Turbo I OK for starters I'm new to Mopar and to Dodge so forgive me ahead of time for not knowing some of the basics. Ive read a lot of info on a lot of things and Ive been surprised at what Ive learned the last few days. When I initially bought my car I figured...
  5. USA Upper and lower IC hoses, RFL BOV, 1988 T2 SMEC, Light Switch

    Parts For Sale
    I have for sale... 1. Lower intercooler hose for 88–89 TII cars: $50 2. Upper (ribbe) intercooler hose: $20 3. Turbo XS RFL blow-off-valve: $50 4. 1988 Turbo 2 SMEC: $40 5. Headlight switch from 1988 Shelby Z Daytona: $10 All prices are as is or best offer and do not include shipping.
  6. BOV & Manual boost controller

    Engine - Turbo & Block
    Just wondering what kind of nov are you guys running on your cars? And what kind of manual boost controller would be the best for a 2.2 t2? Thanks for the help in advance new to the turbo scene.
  7. BOV air filter question

    Turbo Dodge Help
    Can you add an air filter to this BOV: ?
  8. FMIC in 89 Daytona Shelby?

    Engine - General, Exhaust & Induction
    I'm wanting to do an FMIC on my shelby but need some guidance, advice, tips. I'm going to put it right behind the front bumper against the vents and running pipe from either side, and I'm also keeping the A/C. I've had the intercooler pictured below laying around for years and was wondering if...
  9. Custom 2.5" intercooler kit for P-body with Talon BOV

    Parts For Sale
    I have for sale a custom intercooler and piping kit I put together for my 1990 Sundance RS. It is all 2.5" mandrel bent aluminum piping with red silicone couplers and T-bolt clamps. I had a friend make a custom DSM style flange and TIG weld it so the included 1st gen uncrushed Talon BOV bolts...
  10. Better sounding BOV

    Engine - Turbo & Block
    Can some one recommend a better sounding BOV then the TurboXS Type H RFL BOV? I have it and you can barley hear any noise when you let your foot off of WOT. Dennis
  11. Bov on a t1?

    Engine - Turbo & Block
    Eny 1 ever put a bov on a t1 how or was it a drop in oreny ideaz.
  12. BOV and hatch

    Parts Wanted
    I need a good conditon hatch preferably with louvers and spoiler off 85 charger i need help with how to install a blow off valve and the parts id need to do it any inquries about the hatch please call 585 313 7306 or email [email protected]
  13. BOV help

    Engine - Turbo & Block
    im going to be installing a bov on my i/c 2.5 but im not to sure as to which one to get. im not crazy about the sound of the talon bov....can anyone recommend a louder one that can have a small air filter attached to it, dont want debris getting sucked in at idle :eek: i was looking at the ones...
  14. Newbie w/ '91 Daytona CS Turbo needs help

    New Member Intros
    Ok, first of all thanks for stopping in to see if you could help. I have gone over all the vacuum lines i can see and replaced most, if not all with new ones. Are there any vacuum lines coming off the turbo or the BOV? This is the problem I'm having. I get to about 3000 rpm and the car starts...
  15. question on 4 wire o2 sensor conversion

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    hi there i have a 86 shelby charger. i was wondering where is the best place to tap into the for the 12v wire on the sensor. i was thinking of just going off the 12v tapedeck acc. wire. is there a better 1 tho? also off subject but for the bov..how do u close off the wastegate to install the bov...
  16. how many nipples will I need for vacuum block?

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    I have a 1989 Shelby Daytona. it had the 2.2 turbo II in it but I dropped in a 2.5 turbo from a 89 sundance. I'm gonna put in a vacuum block so I wont have any problems with vacuum lines. I'm running all stock equipment(even charcoal canister) and the only thing I've added to it is a Blow Off...
  17. Help on installing cold air intake.

    Engine - General, Exhaust & Induction
    I was told by a buddy of mine that I couldnt put a cold air intake on my 1989 daytona(2.2 turbo II) because there is a flow sensor in the computer housing itself. Is this true? What all would I need to completely make it a good looking cold air intake setup like so many of you have? I'm new to...
  18. vacuum quick release valve

    Engine - General, Exhaust & Induction
    I picked up a vacuum quick release valve which goes between the Trottle Body and Blow Off Valve (see pic). I placed a peice of paper over the screen and sure enought when I let off the gas and the blow off valve is activated it blows the paper off. My question is, is this used to quicly dump the...
  19. My intercooler diagram - HELP please?

    Engine - Turbo & Block
    ok so didnt quite get the answer i was looking for last time :welloh: ok so..... i have a t1 charger... a 1986... its got the S60 cam, ECU, 2.5 head, larger turbo, etc etc... ...ill show i diagram how i think the intercooler is hooked up but ill list it like this too... Exhaust manifold >>...
  20. Installing that intercooler -- HELP?!

    Engine - General, Exhaust & Induction
    Ok so I've never installed an intercooler, and by install i mean 'hook' it up... can someone please post detailed pics of how their intercooler is hooked up? I have an 86 shelby charger turbo. i bought an intercooler and bov. i dont how to install them... i think "hook them up" would be...
Top