Turbo Dodge Forums banner

conversion

  1. tbi to turbo conversion

    Electrical
    I am in the process of converting my 91 tbi shadow to turbo2. I am using an 89 smec because this was the easiest computer for me to get. I used the existing wiring harness. I found dealership wiring diagram books. However injectors 1 and 2 refuse to fire. the car has spark fuel pressure. the...
  2. tbi to turbo 2

    Turbo Dodge Help
    My car is a 91 tbi Shadow. The computer I am using is an 89. I tore the harness out and made it to 89 specs. everything should be perfect. However, the car will not fire. I have spark as well as fuel pressure. My injectors don't seem to be turning on. I will figure that one out tomorrow...
  3. USA Convert 4 Lug to 5 Lug 4313634 Hub and Drum

    Parts For Sale
    Very Rare. Purchased New Many Years ago for a 4 Lug to 5 Lug Conversion- Got rid of the Car. These are Factory Pieces, that were never used, they have been kept out of the weather (indoors, clean and dry) they have minor rust, and will work for many of these conversions. Please check your part...
  4. Rear disc options

    Transmission, Suspension, Brakes, Tires & Wheels
    Idk if this had already been made aware of or not but any of us using a rear disc setup that is 5 lug non-vented, smaller solid rotor there is more options available for our pads/rotors!!! And there cheaper and more available! And you can easily get CERAMIC pads to better fight not only brake...
  5. Tbi to T1?

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Ok 92 spirit tbi auto, I'm actually keeping it N/A but going to use a flex fuel spirit computer and intake, fuel rail, fpr, and injectors. But for all intensive purposes we'll just say TBI to T1 because I know it's been done. My question is; is there anyway to wire in the injectors to my 92 tbi...
  6. Bolting MPFI parts onto a TBI.

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Very long story short: I have an 87 Shelby Daytona that has been in storage for 6 years. Shot a rod the day I bought it after saving to buy my first car. At this point I just want it back on the road. If I pick up a 2.2/2.5 NA motor, can I bolt on the MPFI manifold and use the same PCM/Logic...
  7. Suspension rear wheel drive conversion dodge daytona

    RWD Turbo-Dodge
    1990 Dodge Daytona rear wheel drive conversion Hello all, Thought I'd upload some pictures of version 2 rear wheel drive conversion on my 1990 Dodge Daytona RWD conversion. This design completely bolts in!! Yes we still need to remove the spare tire well and relocate the gas tank, but it's the...
  8. Converting TBI to carburetor issues

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    I'm currently converting my 89 3/4 ton dodge from a TBI to a carb. We have traced out all of the wires, figured out the auto shut off relay and have power to my coil. But, the orange and grey wire that feeds into the distributor is where I'm stumped. The orange wire is hot. But we can't get a...
  9. Three wire connector by passenger side strut tower

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Hey guys just finishing up my t2 conversion on my 1987 dodge shadow, and I have found a connector that I don't know where it goes. The connector looks alot like the map sensor connector but is black with larger gauge wires going into it that are blue or have blue tracers, the connector is in the...
  10. Rampage wiring

    Turbo Dodge Help
    I have an 1983 Rampage and a complete low mileage 1988 dodge 400 turbo...and want to put the turbo motor in my Rampage> do they make conversion wiring or should I use all the wiring from the 400? Nice website!
  11. USA manual trans & parts wanted for conversion

    Parts Wanted
    I'm swapping out the 3-speed automatic transmission in the 87 LeBaron 2.2L TII with a 5-speed manual transmission. I already have everything I need in my 84 Laser 2.2L TI that has a 525 transmission. But it would be a lot less work to use parts that I don't have to remove from my other car; also...
  12. RWD Turbo Rampage Dakota

    RWD Turbo-Dodge
    I've been thinking of different things that I would want to do with my 84 Rampage. I'm torn between converting from carb to the turbo set up and a RWD conversion. I recently stumbled across a 90's Dodge Dakota RWD with the 2.5L 4-cylinder engine with a 5-speed. I think it would be sweet to...
  13. Confirm my diagnosis

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    A little background - car is an '88 Daytona 5 speed, was originally a Mitsu T1, currently has an early garret T1 with the inlet adapter and the induction system from a T2. Also has Boost Button cal for 18 PSI. Has a vacuum manifold and the turbo does NOT have the nipple on the compressor...
  14. running shifter cables for 5 speed conversion

    Transmission, Suspension, Brakes, Tires & Wheels
    I'm putting 555 in my H body. I found some info about running the clutch cable, but not for running the shifter cables. I pulled up the carpet inside the car and noticed two small dimples in the floor pan just in front of where the shifter assembly is mounted. Is this the right spot to drill for...
  15. New guy here. I have an 84 Dodge Rampage

    New Member Intros
    Hey I'm Tristan. My first car was an 84 Dodge Rampage. I drove it until the frame rails rusted out too much. I am about to start restoring it as my college project. I am looking at getting an 87 Shelby charger to convert the rampage to a turbo shelby. I also have turbo parts off an 87 LeBaron...
  16. TII conversion problems!!

    Turbo Dodge Help
    here are the problems I'm having (ofcourse it wouldn't be easy).... The wiring for the injectors does not match the stock connector.... What should I do??? Next problem: This is how I THOUGHT the turbo was supposed to go back on... Obvisouly I was wrong b/c the outlet is hitting the...
  17. MPFI N/A car... need some help

    Carburetted and TBI Injected
    Well guys a couple months ago my 83 shelby charger was totalled but it still runs perfectly and i recently picked up an 84 rampage with no engine and im wondering what it would take to convert it to MPFI.... Parts I have: 1. Engine wiring harness from a turbo omni i believe 1986 2. 2 piece...
  18. starting up a t2 conversion on a '87 t1 log cal

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    so i am almost complete my t2 conversion in my 1987 shadow with a 2.2, almost all the mechanical side of things is in order and together, but i do not quite have my lm figured out as it is not reprogrammed to t2 status. my question is, am i able to ONLY START, NOT REV OR DRIVE JUST START AND...
  19. Adding Air Conditioning

    Turbo Dodge Help
    I want to install AC in my 89 turbo caravan. I know this is a bitch of a job, so I'm prepared for that. I'm wondering if there's anyone out there that has done it that can offer any tips. I have most of the underhood stuff, and that's the easy part. I'm looking for a donor van, but might end up...
  20. How hard is it to do a rear disk brake transplant

    Transmission, Suspension, Brakes, Tires & Wheels
    I have a 86 CS with of course drum rear brakes and a 90 es with discs how hard is it to swap them and what do I have to do I'm not too worried about the EBrake on it cause the cable is siezed
Top