Turbo Dodge Forums banner
cruise control
1-7 of 7 Results
  1. Transmission, Suspension, Brakes, Tires & Wheels
    OK, I wanted to post this as a separate thread so it would be easier to find. I figured in the transmission section would be best, but if the mods want it in electrical, by all means move it. When I swapped my 89 Daytona ES 2.5 turbo from an auto to a 5 speed, I lost cruise control. There...
  2. Turbo Dodge Help
    Search is not helpful here. I have a 89 Shelby Daytona, only it's missing the cruise control module/bracket. Anyone have a picture of the bracket and module mounted by the battery? I find nothing online. A picture of the bracket would be helpful. Much Appreciated.
  3. Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    I'm researching installing cruise control on my 89 Daytona C/S which came with no options. I already know that the following parts will be needed: Speed Control Switches Inside Wiring Clockspring(Airbag equipped cars) Stoplamp Switch Speed Control Servo Underhood Wiring Cruise Throttle...
  4. Engine - Turbo & Block
    I'm putting a garret turbo on my mitsu 89 2.5 The T1 garret is ready to go as far as grinding to fit etc. My problem is that there are two vacuum lines on the compressor of the mitsu and no ports on the garret. Do I need to drill and tap the garret for these lines or are they not important...
  5. Parts Wanted
    It's located by the air box and looks like a 'Y' If you look thru the 'Y' you will see a aluminun insert restricting the air flow too a pinhole.
  6. Turbo Dodge Help
    I was wondering did they make alot of 87 CSX with cruise control ? or is that a rare option
  7. Engine - General, Exhaust & Induction
    I'm going to install the cone air filter in my J-body LeBaron. What do I do with the cruise control, PCV air box connections. Do I need to install a small cone filter to replace the air box connection? Can I combine both of these connections with a T and only use one filter? Thanks in advance...
1-7 of 7 Results
Top