Turbo Dodge Forums banner
distributor
1-11 of 11 Results
  1. Parts Wanted
    I need the engine side wiring connector pigtail end for the gray connector to the distributor pickup coil / Hall effect switch. The longer the lead wires the better. Opposite sex of picture...
  2. Parts For Sale
    T1 NOS fuel rail https://www.ebay.com/itm/181987659583 T1 NOS distributor https://www.ebay.com/itm/181987952283 Not mine, just thought I'd share!
  3. New Member Intros
    So this is the first time on site and I got a question for anyone out there I have a 87 Dodge Daytona 2.2 liter turbo engine and it won't start I drove it home after I bought it changed the distributor spark plugs and spark plug wires and distributor cap and it hasn't started since wants to know...
  4. Electrical
    I'm currently converting my 89 3/4 ton dodge from a TBI to a carb. We have traced out all of the wires, figured out the auto shut off relay and have power to my coil. But, the orange and grey wire that feeds into the distributor is where I'm stumped. The orange wire is hot. But we can't get a...
  5. Parts Wanted
    hey, i just bought an 87 shelby turbo z and the person who owned the car before me lost the bracket that holds the distributor. needless to say the car will not start without the bracket. any information on where i could find one or anyone who has one they would want to sell would be...
  6. Turbo Dodge Help
    so i have been noticing while going around turns that my engine light comes on. first thing i did was check my oil. i was a little low but not much. added more and went driving, its still doing it. ran my codes and got 11-12-55 but 12 and 55 are normal. i dont see how 12 would affect my engine...
  7. Turbo Dodge Help
    A few days ago I started my 2.5 engine after a complete rebuild. The distributor timing was off a bit but it at least started. Today we tried to start it and there was no spark. We traced it to the coil wire. What needs done to get the spark back?
  8. Parts For Sale
    One aluminum turbo valve cover and one turbo distributor with wires, sold as a lot for $50 plus $20 shipping within the US only. Payment is via PayPal. Please reply to this listing if you are interested, or you can message me directly. Thanks!
  9. Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    So around 2 months ago, replaced the factory distributor out to a reman. from O'reilly's. Car instantly ran better. About a week later, my electric cooling fan motor went out. Was a PITA to change the motor, as the plastic fan didnt' want to come off the old shaft, but got it done. has been...
  10. Carburetted and TBI Injected
    I've heard of people making a distributor that is adjustable as of timing wise by using a 1.7L distributor and a 2.2L distributor together and was wondering how do you do that? :bang head
  11. Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    When you replace your HEP, do yourself a favor and do the following: 1) Pull the distributor 2) Check the shutter wheel to make sure it is not loose 3) Check the shaft for play 4) Set your HEP on the distributor and spin it by hand to make sure that the shutter is not hitting the HEP I was...
1-11 of 11 Results
Top