Turbo Dodge Forums banner

engine swap

  1. look to drop an engine in a 88 daytona

    Engine - Turbo & Block
    I have a 1988 daytona and the engine just went and want to put a better engine in, just wondering what engines will fit in the car no problem.
  2. New member, 89 Daytona Project Help

    New Member Intros
    Hi everyone, I have always loved Daytonas since my Mom bought a blue 89 Shelby Daytona brand new! I finally picked up an 89 Daytona t-top, myself. As you know they are becoming very difficult to find, especially with t-tops. Well, I found one in decent shape with t-tops, and very affordable, but...
  3. 1992 Dodge Spirit R/T Swap?

    Engine - Turbo & Block
    After selling my nsrt-4 I am looking to go with something cheaper but still fun to mess around with and possibly make some power down the road. Came across a deal on a 1992 Dodge Spirit R/T today online, and it looked promising until I saw that it was swapped from the original 2.2l T3 to a 2.5l...
  4. Need help identifying a motor

    Engine - Turbo & Block
    I recently bought a 89 daytona c/s that had the 2.5t1 right now it has im pretty sure a 2.2 but the problem is it has no vaccuum lines hooked up and I'm not sure what i have to do to figure out the vaccuum diagram and does it matter what calibration i use?
  5. Shelby csx # 344 engine swap

    Turbo Dodge Help
    Hello Recently picked up this csxt t as a rolling chassis.for the time being I am going to put it back to stock 2.2l t1. 5 speed Question: The motor I got is out of a automatic .Besides the fly wheel what other parts might I need 2 change ?also any other snags that I might run into? Thank you
  6. '89 Daytona Shelby/'94 Shadow

    New Member Intros
    Hi, my name is Alex and I have never made a post before. So forgive me if I do something incorrectly. I have looked all over on this site and Google for my question but haven't had any luck. I have a 1989 Dodge Daytona Shelby with the 2.2 T2 and a 1994 Dodge Shadow Base with a 2.5. I was...
  7. 86 engine replacement

    Engine - Turbo & Block
    I am putting a 2.2 tI hooked to a 5speed in a Shelby charger into my 86 daytona I know about the distributor but what transmission would the 85 have and will the cv shafts work but I am going to put a different head onto the 85 (782 casting going onto it)
  8. Need 89 Daytona TI engine harness

    Parts Wanted
    swapping engines making Daytona into a Turbo I, looking for engine bay harness. :bang head
  9. 1982 dodge rampage

    Turbo Dodge Help
    does anyone know of any v6 motor that will fit my rampage please help tired of the v4
  10. The 88 3.3 swap

    Chrysler V6 engines
    Alright floks here are some pics of the 88 tt turbo v6 swap, I've got some video but i have to set up the you tube 4 it. I'll admit i need help on the tunin' so i'll ask some of you turbo vets as this is oly my second car build..... so... first the before stuff.. then some mid stufff etc..
  11. 1986 dodge daytona engine swap

    Engine - Turbo & Block
    I have an 86 CS daytona that needs and engine I have two choices choice number one the one I like is take the engine and head out of a 90 2.5 tI with 220000 but not the tranny cause it's shot or the engine and maybe tranny outta an 88 tII that has 293000 not my favourite choice but it's already...
  12. 1988 ram50 engine swap advice?

    RWD Turbo-Dodge
    I have a 1988 ram 50 5 speed 2.0 liter.It's actually a Really sharp looking truck BUT Basically its a piece of sh*t. It's my first truck that I ever owned and I plan on keeping it for a long time to come. The engine has almost 170k miles on it with no previous rebuild. It smokes all the way to...
  13. 1989 daytona 2.2 engine swap help??!?!

    Engine - General, Exhaust & Induction
    I have a 1989 daytona that was originally a 2.2 turbo II 5-speed. The engine had a rod knocking and other various issues so I decided to swap a good 2.5 turbo 1 engine from a 1989 plymouth sundance into the daytona while still using the intercooler originally in the car. the sundance originally...
  14. Looking for Engine swap info

    Engine - General, Exhaust & Induction
    I hope this is the right area for this, anyways..... I have a 93 sundace and i want to do a engine swap sometime in the next few years for more power. my current is a 2.2 tbi with a 3spd auto. a turbo is alot of extra work, but would be the easyest swap. What i would like to do is take a 3.8 and...
  15. aclaim v6 in a shadow

    Engine - General, Exhaust & Induction
    what other parts would i need to make this work i bought a complete 1991 aclaim with a v6 and would like to put it in my 2.2 l shadow i'm assuming i'll have to get some other parts from a v6 shadow or am i wrong ? not planing on doing this right away but would just like to know what parts to...
  16. 1989 2.5l turbo Acclaim motor in a 1993 Sundance Duster?

    Engine - Turbo & Block
    Hi i'm new to engine swaps and such. I was just wondering in a 2.5 liter turbo from an 89 plymouth acclaim would be compatible with my 2.5 liter 1993 plymouth duster. Please let me know - if it is possible - what i would need besides the motor for my car to be drivable.
  17. Daytona


    Removing engine in the apartment complex garage.
  18. Engine swap help

    Engine - General, Exhaust & Induction
    So I'm thinking about putting a 2.2L Turbo 2 into my uncle's engine-less Kia for some rice-busting sleeper action :) Does anyone know if it will fit? I don't see why it wouldn't because the Kia originally had an I4 and the 2.2L is an I4, but I figured I'd ask. I don't know a whole lot about...