Turbo Dodge Forums banner

gear

  1. Timing issue 1985 Omni GLhT

    Turbo Dodge Help
    hi, I am having a problem with the timing on my 85 Omni 2.2l turbo. i just installed a new timing belt and i double checked that lined up all the marks on the gears and i was positive it was at top dead center on cylinder #1. I started it up and did a full ignition timing check and made sure it...
  2. CANADA Help with fixing Odometer gear

    Parts Wanted
    Canada - I'm looking for someone who can repair the gear on my 1989 Odometer. I have attempted to get the needle off (I had a spare odometer) and it has broken down to the point where it cannot be fixed. I do not want to do the same on my current odometer. I'm in Ontario, Canada but would be...
  3. gear shift problem

    Turbo Dodge Help
    My mechanic is telling me I need a gear shift tube for my 1986 Dodge Shelby Charger. They don't make the part anymore. Any idea of where I could find this or have one cutom made. Reverse, first and second are all thrid gear. Any other ideas? Maybe even a similiar car has the same part? Thanks
  4. 2.2 vs 2.5 cam differences

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    alright I just wanted to know what are the differences between the say 1989 2.2 t1 cam and the 1989 2.5 t1 cam? I'm gonna put the f-2 cam in my 1989 2.5 (that I converted to a t-II) from fwd performance. would I need a cam gear and If I did what would be the degree I set it on or whatever you do...
  5. Square tooth cam gear on a Round tooth cam

    Turbo Dodge Help
    So I put a Non-CB engine into my 89' Daytona. I used the head (89) off the car on the new motor. I swapped out the Round tooth cam gear for a Fidanza Adjustable Square Tooth Gear. Now I was wondering if the gears are the same other then the obvious teeth. Would putting the square tooth on have...
Top