I have had a heater issue for a long time in my '91 Spirit, 2.5L. I turn on the heater, starts generating heat, then it cuts off and the 'Air Bags' light comes on. I turn off the heater and the light goes off. Turn it on again, cuts off, light goes on, turn off, light goes off. I am aware this...

Looking for the OLD ‘81-85 guy, NO heater hose inlet, bottom rad hose inlet ONLY. P/N 5203714. Thanks

Just stumbled across this today! Bet it would be great for anyone who drives a carb' 2.2 in a region that actually has a real winter season! https://www.ebay.com/itm/382113922790

So I Just bought a 92 Daytona 3.0L with a few coolant leaks (waterpump, freeze plugs, and a few hoses). After fixing all of these things I am having heater issues such as once it warms up it blows lukewarm air, but if I turn the heater off for a few minutes and turn it back on it blows nice and...

Ok so this is kinda a dumb question but I need to ask it anyhow. I just replaced the heater core in my 89' Daytona and I'm currently stuck on the re-assembly process due to this wire. It's the manual lever that uses the wire instead of being vacuum controlled. No matter which way I try and run...

I have an overheating problem.I am not leaking any water/antifreeze though.I had the radiator flushed and I replaced every single radiator/heater hose in the engine bay. I also replaced the thermostat. If I let the car warm up to operating temp it shoots straight up almost to hot and then if I...

I have to replace the Heater Core in my 89' Daytona. I know the FSM states that the AC needs to be discharged in order to replace the heater core. Has anyone found a way around that? I read one old thread but he already had his dash out.

I need help with one of the vacuum lines that comes off of the heater control. It's one of the two that goes through the firewall by the brake pedal. I've got the one that hooks up to the master cylinder, I just can't figure out where the other one goes. I've searched every inch of the diagram...

I have a 1988 lebaron with the vacuum line missing from the heater diverter valve. Can anyone tell me where this line passes thru the firewall at?:tsktsk-tisk: