Turbo Dodge Forums banner


  1. Formula GP Shocks! Holset, TII radiator/ intercooler, ghead, holset, hoses, fuel rail

    Parts For Sale
    Date: 27th May 2015 Username: tryingbe Full Name: Harry Lui City, State, Zip: Mesa, AZ 85204 Contact: tryingbe at yahoo dot com FM Max Flow Intake manifold. It was a 88+ intake manifold, the restrictive neck has been cut and a large 2.5 inch pipe welded in its place. The individual ports have...
  2. T2 rad/intercooler setup wanted

    Parts Wanted
    I'm looking for a good T2 radiator and intercooler to throw in my 88 Daytona. It would be nice if the fan is with it as well. I am also looking for the lower, long rubber intercooler hose, as well as the upper hoses if anyone has them.
  3. Turbo hoses

    Engine - Turbo & Block
    I bought a new Mitsubishi turbo for my 1989 Dodge Daytona 2.5L and I'm missing all of the coolant hoses and oil hoses that go to the turbo. I also bought an original Shelby intercooler. I don't know what I need to accomodate the intercooler and I don't know where to find the hoses for the...
  4. L-body brakes

    Transmission, Suspension, Brakes, Tires & Wheels
    Just need to know if the brake hoses ( caliper to frame) on an L-body are interchangeable from side to side other than the bracket that holds it to the strut. I need my charger up and running for Monday and I have a bad hose on passenger side. The local parts place only has the drivers side ( of...
  5. Overheating problems.How Do I hook up the Heater control valve.

    Turbo Dodge Help
    I have an overheating problem.I am not leaking any water/antifreeze though.I had the radiator flushed and I replaced every single radiator/heater hose in the engine bay. I also replaced the thermostat. If I let the car warm up to operating temp it shoots straight up almost to hot and then if I...
  6. how many nipples will I need for vacuum block?

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    I have a 1989 Shelby Daytona. it had the 2.2 turbo II in it but I dropped in a 2.5 turbo from a 89 sundance. I'm gonna put in a vacuum block so I wont have any problems with vacuum lines. I'm running all stock equipment(even charcoal canister) and the only thing I've added to it is a Blow Off...
  7. Novice Mechanic, replacing vacuum lines

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Hey everyone. I'm just learning how to do vehicle repairs, and right now, I want to completely replace all of my cars vacuum lines. My major question is, What size hoses am I suppose to use? does it matter what the sizes are? Where do I use hard vacuum lines, and soft vacuum lines? at one...
  8. Intercooler Piping

    Engine - General, Exhaust & Induction
    A hose recently cracked in my Lancer, specifically the hose between the airbox and intercooler. It cracked right where it connects to the intercooler and I was venting boost to the atmosphere. So yesterday, I went to AutoZone and picked up a huge radiator hose (2 inch inside diameter) with a few...