Turbo Dodge Forums banner

idle problem

  1. Parts Wanted
    Hi everybody.. My girlfriend recently bought a 84 Omni and I've been going through replacing everything that's bad and finally got it started the other day. So I got it started but it won't keep idling, it won't start unless I put my hand almost completely covering the carb flaps then it'll...
  2. Turbo Dodge Help
    I just bought and 89 plymouth sundance 2.5 turbo I took it in for an oil change new air filter and pcv valve I parked it started it up the next morning and its idling like crap dedfinitly missing. I checked vaccume lines spark plugs wires are good and the maf senseor and my check engine light is...
  3. Turbo Dodge Help
    ive got an 86 T1 daytona automatic sometimes it will start and idle normally and take fuel great other times its hard to start and i have to feather the gas to get it going then its fine untill it gets hot then it will randomly shut off and has to sit a few minutes to restart.i have checked...
  4. Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Car is having a rough time idling, and taking off under no boost. Issue is intermittent, but becoming more often. First it felt like it was a misfire under light acceleration, but now happening very often. I'm getting black smoke out the tail pipe when is sputters, and fouled a set of plugs the...
  5. Turbo Dodge Help
    my 89Daytona-t2.2 wont idle, it lopes between 500 and 1000 rpm. oh and it seems like it going to die during the wack idle. i have a side exhuast so i noticed that when it lopes it shoots out black smoke, smells like unburnt gas sometimes like rotten egg. dont know what the problem can be need...
  6. Turbo Dodge Help
    Alright folks here we go.My 86 shelby has been upgraded to a 88 system,the engine completely redone.Here is my list then i will pose my problem.steel crank, t2 rods, forged pistons, file fit rings, 1mm over valves,ported exhaust,3in down pipe,46\63 turbo,spearco intercooler,40 over...
  7. Engine - General, Exhaust & Induction
    Alright folks here we go.My 86 shelby has been upgraded to a 88 system,the engine completely redone.Here is my list then i will pose my problem.steel crank, t2 rods, forged pistons, file fit rings, 1mm over valves,ported exhaust,3in down pipe,46\63 turbo,spearco intercooler,40 over...
Top