Turbo Dodge Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Exterior
    List of needed materials 2 packs of vehicle branded mud flaps containing, 2 flaps, 6 screws, and instructions if you want, extra plastic or metal to strengthen the rear flaps as they only screw into the plastic bumper Tools needed jack jack stand 19mm lug nut socket breaker bar/ratchet 1/4 hex...
  2. Engine - General, Exhaust & Induction
    List of needed materials 1 1996 to 1999 ford Taurus radiator fan and shroud 2 wire connectors of your preference 2 pieces of shrink wrap of 2 to 2 and 1/2 inches in length some weather striping of various widths and depths 1 or 2 zipties some electrical tape or split loom if you want Tools...
  3. Mitsubishi V6 engines
    I decided to create some sort of Msegasquirt install guide for the 3.0 since there seem to be a lot of questions about it. As of this writing the only way to tune the fueling curve and spark curve on the 3.0 is with a standalone or a piggyback control such as an Emanage. First step to...
1-3 of 3 Results