Turbo Dodge Forums banner

low boost

  1. R/T doesnt pull hard no more

    Turbo III
    hey guys i recently picked up a spirit r/t several months and it ran good! The only thing not stock is the open DP. it made a difference, so i finaly put a 180 tstat new oil pan gasket and remove the blance shaft chain and switch to mobil one synthetic. After the work was done went for a ride...
  2. boost control problem

    Turbo Dodge Help
    I have a fresh 2.2 t2 super 60 setup in my 87 daytona I am having a problem with a lack of boost only getting about 4psi.It has the mopar performance#5249528 super 60 ecm and delco#16040749 3 bar map sensor.With wastgate solinoid vacume line hooked to bottom port and a T to intake supply and...
  3. Explain T-1 Mitsu Turbo

    Engine - Turbo & Block
    Hello, On Saturday I helped a fellow TDer install a vacuum block on his 91 Daytona Shelby T-1 Automatic. He had a crate engine installed (Mopar from Mancini Racing, complete with new turbo, injectors and harness, manifolds, etc. When it was installed the shop did a good job except they did not...
  4. Only 5pis, wtf

    Turbo Dodge Help
    So my car has been running like a scalded dog and then decided to go into sloth mode. It was making about 14-15psi if I so much as got my foot near the gas. Now it wont get past 5 or 6psi full throttle. If you remove the waste gate solenoid, it works just fine, but you run into some serious...
  5. low boost 3 psi

    Turbo Dodge Help
    I have a 88 lebaron 2.2. Currently the top boost is 3 psi. I've installed a vacuum block and zip tied all connections. Verified the west gate arm is connected. Replaced all charge hoses with ones from the boneyard. I tried connecting the west gate directly to the vacuum block and still 3 psi...
Top