Turbo Dodge Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Engine - Turbo & Block
    Does a MBC make noise? Ive boughten two diferent turbosmart ones. Have it mounted in the cabin, and can hear and feel them both whistle on the valve body. Recently just got a different turbo swap(super70tofwd 50 trim) and have troubles building boost. Initially thought it was the MBC so I bought...
  2. Engine - General, Exhaust & Induction
    ok ive had a few 2.2s 2.5s but i never really modded them. i got an 85 lebaron turbo and i wanna make it faster but still drivable it seems to run pretty good and the tranny is tight but dam its slow off the line. do these really have that much turbo lag? its like a full 15 seconds before the...
  3. Engine - Turbo & Block
    I took my rebuilt engine out for the first time and i noticed the turbo isnt working at all, everything looks like its hooked up right so i dont understand whats wrong? you can here it whistle and spool up but there is no power from it. and the boost gage moves but doesnt pass 0, anyone got any...
  4. Engine - General, Exhaust & Induction
    I'm doing a Garrett T1 conversion/ have been reading over the info on Donavan's garage web site. My compressor has no nipple., but there is a boss, on the housing. Should I drill/tap it for the nipple, if so what size? The nipple I'm talking about is for the manual boost control hose connection.
1-4 of 4 Results
Top