Turbo Dodge Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Electrical
    Hello, Looking for recommendations Rebuilding a 1987 Shelby Z and have been trying to trouble shoot the oil pressure and water temp gages. Replaced both sending units during the rebuild so they are new. Oil pressure: when I first start the engine it reads half then trails off to low, as I...
  2. Turbo Dodge Help
    Well i got this Shelby awhile ago and I lost the cam plug going down the interstate lost about 3.5q of oil so i filled it back up but unfortunately it ate a rod bearing up a bit and soon it ate the crank, rods, cam, I shaft so pretty much everything SO i garbed a extra set of rods and a crank...
  3. Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    As iv said, this turbo 2.2 is new to me. Wondering about the best oil. I have mobil 1 10-w30 in it. Runs about 35 psi hot, crewsing 65 miles per @ 2700 RPM. Lowest ideling hot 15psi ??? Sound o.k ? Should i have a different oil in it ?
  4. Turbo Dodge Help
    My 92 2.5l turbo Daytona has some problems. She gets me around as my DD, but more and more things are going wrong this winter. So a few weeks ago oil shot through my filler cap and made a mess of my engine compartment. I cleaned everything up did an oil/filter change and it hasn't happened...
  5. Engine - Turbo & Block
    Doesnt matter if the car is cold or hot but happens every time on cold startup now. It has been getting progressively worse over the course of a month or so. It does not have oil pressure for about 10-20 secs from startup. Then its fine the rest of the time. Its def not just the gauge as I...
1-5 of 5 Results