Turbo Dodge Forums banner

pcv

  1. Valve cover curtain/baffle

    Parts Wanted
    Hey there! Need the big stamped steel oil curtain that's under all the TBI valve covers. Let me know! Please and thank you!
  2. Awesome PCV part!!!

    Engine - Turbo & Block
    This is from Metco, P/N MBR0012-10AN this part simply screws into the aluminum N/A 8V valve cover where the oil fill cap would go and provides a male -10AN nipple, this was designed for the gen3 Hemi's, they also make one with a breather cap instead of the AN threads. Fits any hole that a Stant...
  3. Tired of Dorman PCV elbows?...

    Turbo Dodge Help
    Here's a solution! I bought one of these a while ago and it's a great, LONG life alternative too the Dorman/Help brand PCV rubber elbow that dry rots, stretches, cracks and splits in less than a year EVERYTIME. This is a THICK wall silicone/threaded (same as aftermarket turbo/IC hose) elbow...
  4. Pcv and egr after a weber swap

    Carburetted and TBI Injected
    I installed a dfev 32/36 weber on an 82 2.2 in a rampage. I am curious what the common connection of the egr, or just delete it, and how is the funny 2 port pcv connected. I took manifold vacuum, installed a t, sent one to pcv and sent the other to the brake booster. Strangely, it acts like...
  5. what is source of burning oil???

    Turbo Dodge Help
    I am burning oil after warmed up when I pull away from a stop light after sitting for a few seconds. Also when I "romp" the throotle in the driveway a few times. No issues when cold or driving around; maybe a puff once a while when shifting gears so I'm told. It has new engine and new turbo...
  6. oil smoking problem

    Turbo Dodge Help
    I had oil smoke coming out exhaust with a slight knock on a 90*vnt*Daytona I bought. I put a rebuilt motor in it and a rebuilt turbo from turbos r us. After about 20 minutes it started smoking again. A little at idle and when stopping at stop sign, none seen driving or under accellerayion. I put...
  7. 90 vnt oil smoke out exhaust

    Engine - Turbo & Block
    I had oil smoke coming out exhaust with a slight knock on a 90 vnt Daytona I bought. I put a rebuilt motor in it and a rebuilt turbo from turbos r us. After about 20 minutes it started smoking again. A little at idle and when stopping at stop sign, none seen driving or under accellerayion. I...
  8. Boost causes oil leak

    Turbo Dodge Help
    My 1991 2.5L turbo with 25,000 miles, started to push oil through the PCV connection at the valve cover during boost. Replaced the PCV, new valve cover connection, new breather foam in air box still blowing oil during boost. Looking for help to resolve this. Thanks
  9. 1989 Chrysler Lebaron

    Turbo Dodge Help
    So I am a new guy around here. The reason I have arrived is because a few months ago the rubber connector where the PCV valve goes fell apart .I could not get the correct part so I made a connector with hose and vacuum connectors. I was under the impresssion it was working, but since I have...
  10. A little help please??

    Turbo Dodge Help
    Ok so here's the story. I just recently completed a t2 swap in my 1988 daytona. It has a garrett t2 turbo that was supposedly rebuilt 8,000 miles ago. I also replaced the injectors, fuel rail and regulator, and the head gasket. The only part that was not upgraded to t2 status was the computer...
  11. Cold air intake installation question

    Engine - General, Exhaust & Induction
    I'm going to install the cone air filter in my J-body LeBaron. What do I do with the cruise control, PCV air box connections. Do I need to install a small cone filter to replace the air box connection? Can I combine both of these connections with a T and only use one filter? Thanks in advance...
  12. vacuum peice

    Engine - General, Exhaust & Induction
    i've been looking around for the elbow that connects to the valve cover and pcv valve (the rubber boot). what is it called and does anyone know where i can get one. BTW i have an 89' caravan.
  13. Lots of oil blown through, why?

    Engine - General, Exhaust & Induction
    I have a 87 Shelby Lancer, #800 of #800, which is also Evaluation car number 1. I love the thing. Something that it has always done is blow a lot of oil through the air box, air filter and my blow off valve. I am not sure why. Read up of it possibly being the PCV Valve. I have ALWAYS...
  14. Motor oil in air box

    Tech Questions and Answers
    Hi all. Did my first oil change, and I would not be surprised if this was my PT first oil change. I got three weeks ago w/ only 6500 on it, with signs of lack of love and care. Anyway, I have a noticable amount of motor oil in the OEM air box. The foam filter from the air box that feeds the...
  15. PCV from stock to modified...

    Engine - General, Exhaust & Induction
    My PCV system is full of oil. The motor is a BN rebuild, i think it is just how i am routing my PCV system. Factory, there was a spot for the oil to return to block, is there a way to do this with a cone type filter? I am just using a catch can to get my oil, but it sometimes overflows...
Top