Turbo Dodge Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Turbo Dodge Help
    So from all the info I'm gathering, I see that the oil restrictor that presses into the block to restrict the amount of oil fed to the head was used from '86+. My question is, if you're running a slider cam, would it actually be better not to use the restrictor? The only negative I can see is...
  2. Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Hey guys just finishing up my t2 conversion on my 1987 dodge shadow, and I have found a connector that I don't know where it goes. The connector looks alot like the map sensor connector but is black with larger gauge wires going into it that are blue or have blue tracers, the connector is in the...
  3. Mitsubishi V6 engines
    So I'm wondering how much to gap my plugs. I purchased the MSD 8.5 mm wires and moved my coil closer to the dizzy cap (4" length as opposed to stock 12" or so). I also installed a 52mm TB and a Cold Air Intake. Any ideas, I can't seem to find any info. This is for my 3.0 in my '90 btw...
  4. Transmission, Suspension, Brakes, Tires & Wheels
    Anyone know what tool will unscrew the tranny fill plug on 2004 6 spd turbo diesel tranny. It is a female, hexagonal plug. Thanks
1-4 of 4 Results