Turbo Dodge Forums banner

rear

  1. Transmission, Suspension, Brakes, Tires & Wheels
    Alright so we went to throw the old ladies rear disc setup from her Spirit that’s going to the junkyard on to her new Dynasty, only to find out that the rear spindles bolt pattern is a little different between the 2 and the Dynasty used larger bolts. I hopped on StarParts and searched the rear...
  2. Parts For Sale
    RockAuto has some Beck/Arnley loaded rear calipers with hardware and pads on wholesale close out for $14.90 a side!!! They’re listed as only for Dynasty, Imperial and New Yorker because they have the slightly bigger steel piston, but these 100% fit all the rear disc k-car / turbododge setups...
  3. Parts Wanted
    Looking for rear calipers and backing plates from any Dynasty, Imperial, FWD New Yorker/5th Avenue. Let me know if anything is out there, thank you! Went to swap rear disc from the old ladies Spirit to her new Dynasty and realized that the Dynasty uses larger bolts at the rear spindle and...
  4. Parts Wanted
    Hey there! Looking for 1 complete rear bump stop/jounce bumper assembly, in useable condition. Thanks!!!
  5. Transmission, Suspension, Brakes, Tires & Wheels
    Just an FYI here in case this isn't yet a well-known fact; while recently looking for new replacement rear coil spring isolators for non-L bodies, I realized that they do not seem to be available aftermarket. But do to previously doing some spring dimension research and the different vehicles...
  6. Turbo Dodge Help
    Does anyone know how wide these are? Or have one they can measure?? Or have one for sale??? Please & Thank You!
  7. Project Log
    Hey guys. I don't come on the forum as much as I should, but I thought i'd post some pics of my latest project. It is a 1988 Dodge Dakota. Here is what I can think of off the top of my head: 2.5 CB Brian Crower H Beam Rods Venolia Forged Pistons ARP mains, rods, heads, and flywheel bolts Ported...
  8. Parts For Sale
    For sale are grommets for the rear wiper motor of 1984-1990 caravans/voyagers. My van like most needed a new grommet and the originals are no longer sold. These are a very good replacement and fit tightly around the wiper motor shaft and hole in the hatch. I used a bit of sealant in the...
  9. Transmission, Suspension, Brakes, Tires & Wheels
    Idk if this had already been made aware of or not but any of us using a rear disc setup that is 5 lug non-vented, smaller solid rotor there is more options available for our pads/rotors!!! And there cheaper and more available! And you can easily get CERAMIC pads to better fight not only brake...
  10. Parts For Sale
    Rear disc set up from 87' SL. Pulled from my donor. Booster, MC, PV, rear calipers, hubs and spindles. Basically everything needed for conversion except pads and rotors. Rears are solid rotor version with internal e-brake. Calipers should be rebuilt from sitting and the rest cleaned up a bit...
  11. Transmission, Suspension, Brakes, Tires & Wheels
    i have an 84 shelby charger and im lookin to do a rear disc brake swap and its 4 lug, the most common and readily available 4 lug disc brake setup i can find seems to be from an escort! LOL they used the same setup from 92-02, has anyone messed with these? has anyone done any 4 lug rear disc...
  12. Transmission, Suspension, Brakes, Tires & Wheels
    Does anyone run a rear engine/transmission mount on an a413? If you have pictures, please post some. Thanks, Pat
  13. Parts Wanted
    Im looking for the rear hatch glass for an Omni, with or without defrosters. i would like to have the defrosters but anything that will cover up the hatch will do. Im in area code 46311. Im willing to travel or ship to get it. Throw me your offers. thanks for your time, joe :thumb:
  14. Parts Wanted
    Looking for a good set in rebuildable condition for the REAR. GLHS rear shocks...I have the fronts. Ready to buy.
  15. Turbo Dodge Help
    (REAR DISK FORM 87 SHELBY Z TO GLHS OMNI)HEY GUYS I REALLY NEED OT KNOW HOW TO CONNECT THE EMERGENCY BRAKES. OH AND WHAT CAN YOU TELL ME ABOUT INSTALLING THE MASTER CYLINDER AND PROPORTIONING VALVE FORM THE Z INTO MY GLHS JUST WANT TO KNOW FROM THE EXPERTS I AM A NOVICE AND DONT WANT TO SCREW...
  16. Parts Wanted
    Hey guys I need a few parts for my 86 Omni GLHT. RED rear seat Center console (that goes from floor to the dash) Passenger side RED speaker cover Front end grille Shelby windshield & side skirt decals. PM me or post. any info will help thanks -Rick
  17. Transmission, Suspension, Brakes, Tires & Wheels
    i was wondering if anyone knows of where i can get rear diffrential mounts for my 88 conquest, or know of any that will fit??
  18. Transmission, Suspension, Brakes, Tires & Wheels
    I have a Horizon that I'm debating if a rear sway bar is really worth it. I guess that I'm confused about it because it seems like when I see pictures of people installing them they are putting them on a part of the rear suspension that does not sway. Anyone have any tips or suggestions to...
Top