Turbo Dodge Forums banner

relay

  1. Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    I'm currently converting my 89 3/4 ton dodge from a TBI to a carb. We have traced out all of the wires, figured out the auto shut off relay and have power to my coil. But, the orange and grey wire that feeds into the distributor is where I'm stumped. The orange wire is hot. But we can't get a...
  2. Turbo Dodge Help
    ok i'm working on my 89 sundance t1 auto the fan is always on lol, i have replace the sensor that is in thermastat housing i think its the coolant temp sensor, and swaped computers, i tested the sensor and it seems to work fine the ohm's goes down when the temp goes up on the sensor, like if i...
  3. Turbo Dodge Help
    Trying to find the ASD on my '85 GLH-T. A little TD.com and Google searching has lead me to believe it's in the PM. Is this true? The parts store sold me one, however if it's in the PM it's not something that can be replaced.
  4. Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Hi there, after reading through the forums and not getting any answers I decided to post my horn problem. I bought my 1990 Daytona ES (3.0 L) with a few problems (lights didn't pop up, etc.) and managed to get them fixed myself, but this horn problem is the worst. I tested the old stock horns...
  5. Parts Wanted
    I broke one of the metal hoses coming out of the housing for the fuel pump. I have a brand new trank and fuel pump but no relay to put it in. I'm looking for either the whole thing or maybe just the metal cap on the end. Thanks for looking!
Top