Turbo Dodge Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Electrical
    Good evening everyone. Just joined after reading a post on the SMEC and SBEC. I am hoping to identify an IC on this SBEC which I believe controls the ground circuit for an ASD relay in a 95 Dodge B350 Van. It is part #4517702 and looks to be made by ST Microelectronics. I am guessing it is part...
  2. Parts For Sale
    Hey everyone, I'm looking to sell my '89 CSX VNT SBEC I. It is PN: 4516837 Reason: I am planning on converting my TII Omni GLH to a SBEC. While I'm told this SBEC would work for me, it is also rare and special. I would hate to ruin a good thing if I don't have to. However, if I don't find a...
  3. Turbo Dodge Help
    Hey everyone, Looking to identify this SBEC and wiring loom! Not even sure if they are a pair, I only assume so. I was considering using the loom for a Power Distribution Center upgrade on my Omni build since i thought it was the proper '90 lebaron one... However, the Power box was different...
  4. Parts Wanted
    I am in search of a working 2.5L Turbo SBEC for automatic, part numbers I have come up with are: 4639246, 4639248, 4639250, 4672121, 4672125, 4672149, 4672161, 4672162, 4672163, 4672164, 4672165, 4672466, 4672520, 4672649, 4686592, 5234681, 5234791, 5235195, 5235225, 5235227, 5235249, 5235477...
  5. Parts Wanted
    WTB: N/M found what I needed N/M found it elsewhere.
  6. Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Hello all-- I'm wondering if anyone has run into this problem before. I have 2 92 Daytona R/Ts; one was purchased recently for parts to finish my first one. As it turns out, the one I bought last month is not in nearly as bad a shape as expected (the guy I bought it from found it in a wrecking...
  7. Electrical
    I'm currently converting my 89 3/4 ton dodge from a TBI to a carb. We have traced out all of the wires, figured out the auto shut off relay and have power to my coil. But, the orange and grey wire that feeds into the distributor is where I'm stumped. The orange wire is hot. But we can't get a...
  8. Parts Wanted
    I am in urgent need of a SBEC for my 1990 daytona 2.5 turbo with standard transmission. I have had no luck finding one locally and i need it so that i can socket it. Thanks, Troy
  9. Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    A few years back I had a 86 turbo z, a friend gave me the computer that goes buy the passengers right foot and it turned my my boost up to 14lbs or so. It was great now I'm looking for that computer again and part number and were to get it. For my 86 laser turbo. Thanks u guys have helped me...
  10. Parts Wanted
    I am looking for a 1992 turbo 2.5 8 valve sbec for 5 spd but auto should work too
  11. Parts For Sale
    Got a nice '90 2.5 Turbo/5spd Federal/Canada SBEC (label # 4557 593, s/n 5276 411) for sale. This SBEC is also compatible with 1991 cars. Computer is in perfect working order, housing is intact and undamaged. $75 plus the carefully-packed ride.
  12. Parts Wanted
    I need a computer for a 1990 Daytona with 5 speed manual that has the 16v conversion done on thew 2.5 motor.
  13. Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Title pretty much says it all. I'm converting a 1994 3.0 Lebaron to a 1990 T1. I've got a full 1994 FSM, the 1990 60-way SBEC connector and BCM pinouts, and I need to verify that the 50-way connector pinouts didn't change between those years.
1-13 of 13 Results