Turbo Dodge Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Turbo Dodge Help
    Hi there, I'm having turbo issues again.. I had bought a garret t3 60mm turbo 2 years ago. Ran great at 14lbs for 12 months before the oil seal on the exhaust side blew and oil leaked straight into the swing valve and then puffed white smoke out the exhaust. Bought a rebuild kit through Garrett...
  2. Parts For Sale
    For sale are grommets for the rear wiper motor of 1984-1990 caravans/voyagers. My van like most needed a new grommet and the originals are no longer sold. These are a very good replacement and fit tightly around the wiper motor shaft and hole in the hatch. I used a bit of sealant in the...
  3. Parts For Sale
    I have two sealed kits I got from Drivetrain Specialists in Las Vegas many years ago. (www_dot_drivetrain_dot_com) They don't even have these anymore. MEK100385 Bearings/Seals/Shift Pads Kit SK301A Synchro Ring Kit Both kits are labeled "natpro" and are 100% sealed. Bearings are Timken...
  4. Turbo Dodge Help
    Ok so I'm pretty sure the seals have gone out on the factory turbo on my '88 Daytona. Is it possible to replace the seals on the turbo, or will I have to replace the turbo all together? If so, where would be a good place to find one? Thanks!
  5. Parts Wanted
    I need the the metal piece that the front main seal sits on that sits directly behind the crank pulley. I am uncertain what its called but need a new one nevertheless. BTW its for a 2.2 if it matters Also located in the USA!!! stupid middle mouse button!
1-5 of 5 Results