Turbo Dodge Forums banner

sensor

  1. Coolant temp sensor, stalling???

    Turbo Dodge Help
    Need HELP! 87 2.2 TBI Auto Aries. Randomly stalls or tries to, typically after engine warm up. Only code has been coolant temp sensor, which I’ve replaced twice now, both new Mopar units. However Does not always set code. Took all the wire loom off to inspect HEP wiring as well as temp...
  2. 1990 Omni / Horizon Airbag Impact Sensor

    Parts Wanted
    I'm looking for the two front airbag impact sensors found on a 1990 Omni or Horizon. It is behind the headlight bezels secured by three 13mm bolts. It should be part number 4504223. There are no other models this part interchanges with because the mounting is different for each car. Let me...
  3. USA Adjustable over boost eliminator

    Parts For Sale
    $30 shipped to your door. Includes instructions. With this youll be able to do an extra injector or whatever you want past the 14.7psi cutout.
  4. autometer wideband 5779 in 1987 shadow

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    ok so I'm just finishing up the final steps to get my shadow running on t2 status, and came across an Autometer wideband air/fuel gauge 5779 for cheap and bought it, i thought i understood what i had to do to install it, but after searching the forum, i'm getting confused so i have a few...
  5. 89' Caravan T1 Auto Transmission Degradation?

    Transmission, Suspension, Brakes, Tires & Wheels
    In the last months I started to give some love to my old Caravan, It has around 160,000Km (not sure because I changed the cluster without taking note of the diference), I have changed a lot of small old parts for new ones and fixed some mess with the vacuum lines, and I think one of the lines...
  6. Vacuum system all kinds of messed up.

    Turbo Dodge Help
    So, my vacuum system is messed up pretty bad. The person I bought it from did a LOT of shade tree mechanics with this car. Nothing is going to where it should. I don't need to redo it, I'll be transplanting it into a Shadow/Sundance soon hopefully. It's current home is an 89 LeBaron, 2.5L turbo...
  7. question on 4 wire 02 sensor install

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Hey everyone! I just hooked up a 4 wire 02 sensor to my 1986 dodge charger. When it heats up enough for the 02 sensor to kick in it doesnt seen to be working. B4 i intalled this 4 wire, the pervious owner broke off the 1 wire on the original 1 wire 02 sensor...so when it heated up to go off the...
  8. can someone plz answer this q?

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    I've asked a few people and it seems like no one can give me. Straight answer..I have a 1986 t1 shelby charger...can anyone tell me the the igniton 12v wire color and the best place to tap into the wire??? Thks all!
  9. 4 wire O2 sensor question

    Engine - General, Exhaust & Induction
    hi everyone. i have a 86 dodge charger im coverting the 1 wire 02 to a 4 wire. I only have 1 question. i know you hook the heater wire to a 12v source. I heard you use the ignition wire? is that true? and where is the best spot to tap into it? thks! -ryan
  10. question on map vac line

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Hi everyone! I was told that you don't need to run the vacuum line from the intake..to the map solenoid...then to the map. And you can just go directly from the intake to the map? True?
  11. How many o2 sensors for a 91 daytona turbo?

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Plain and simple. While under my car tightening the power steering pump, i noticed that i have two o2 sensors. One in the manifold, and one further down on the down pipe. I have no cat, don't know if that makes a difference or not. The manifold o2 is plugged in, but the downpipe o2 is not. Its...
  12. question on 4 wire 02 sensor

    Engine - General, Exhaust & Induction
    im going to buy a turbo 2 4 wire 02 sensor for my 86 charger soon. i already know where im putting the 2 ground wires.. but whats a good wire to tap into for the 12v powerwire? thks -ryan:dancing:
  13. speed sensor

    Turbo Dodge Help
    i have a problem, my speedo was working but stopped now, it was an analog so i switch to digital now, evrything is hookled up correctly, speedo still doesnt wrk, where is the speed sensor located, mayb its bad
  14. Oil Sensor Install

    Engine - General, Exhaust & Induction
    yesterday i was driving and realized somethign was off, tunred out too be an oil leak thats hitting the enginge therfore creating some smoke. anyways ive found out that it is an oil feed sensor, i got the part for 20 bucks and need to install it this afternoon or plan on it with my buddy...
  15. a-555 swap

    Transmission, Suspension, Brakes, Tires & Wheels
    I am not sure what to do with my speedo cable do i use my old one or the new one, the new one looks as if it doesn't have that long cable that runs to it. help please
Top