Turbo Dodge Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Transmission, Suspension, Brakes, Tires & Wheels
    Needed to change a wheel bearing (92 daytona ES) so decided to change the struts and lower it by cutting springs. Got the struts from a 89 ES an did the necessary swaps so it all would match. But ok, so I cut the back springs by a half coil each and it dropped it between 3/4-1in, and it sits...
  2. Transmission, Suspension, Brakes, Tires & Wheels
    I have a '88 dodge shadow es and i want the suspension to be the same or close to the shebly versions of my car. does anybody know what suspension componets were different on the shelby compaired to the basic modle and what the spring rates were for the shelby version. thanks
  3. Parts Wanted
    Looking for set 4 Koni struts all the way around,or a set 4 rally springs that will fit over a replacing suspension which is like ebay struts.
  4. Engine - Turbo & Block
    I have a 1989 2.5 turbo that I'm rebuilding. I'm putting the stock bottom end in it but other than that I'd like to modify everything coming off of it for more power. I'm gonna have the head completely done(including beehive springs)and I want this thing to be as beast as it can be with stock...
  5. Turbo Dodge Help
    I have a 93 shadow parts car I was thinking of swapping the entire k frame including a-arms, struts and brake components into my 89 spirit es. I was wondering if the struts or spring are different from car to car? Any one know? Also I know this will all bolt in what I am wondering is if the...
  6. Parts Wanted
    Is anyone selling any of the rubber Absorbers that sit under the rear Springs on an '89 Dodge Daytona Shelby? Or does anyone know where I can go and get new ones, because they are no longer available through Chrysler. Mine are destroyed.. Thanks for your help..
  7. Transmission, Suspension, Brakes, Tires & Wheels
    I want to lower my 1989 Daytona Shelby about 2-3 inches if there wont be any clearance issues. I don't want to have to mod some coil overs or anything like that and I don't have major $ to spend. I just want some lowering springs which ones should I use? It's just gonna be lowered for a more...
1-7 of 7 Results