Turbo Dodge Forums banner

t2

  1. 88 Daytona to 88 Omni TBI swap harness

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Does anybody have a link to swapping out the pins on these? I believe both harnesses have to be chopped and rewired together because the Omni has a 40 pin connector and the Daytona has a 50 pin. I haven't verified this for sure yet but any information would be appreciated. This is keeping my...
  2. Engine TII Pistons & Rods!!!

    Parts For Sale
    I have a set of floating T2 Pistons and rod assemblies for sale! Pistons are new Mahle's on Chrysler T2 rods P/N 4323958. They do have pins and locks, but No rod bearings or piston rings. Pistons were installed but never ran. Asking $200 OBO
  3. 2.2L T2 low oil pressure, common or concern?

    Engine - Turbo & Block
    Have an 87 shelby z daytona with a 2.2l turbo II from a newer daytona. Sat for 3 years, finally got it to my house and got it running. Like all old cars that sit for extended periods of time, there are issues that arise. There's an aftermarket oil pressure gauge installed by previous owner...
  4. New Mopar Performance Super 60 turbocharger with Stainless lines

    Parts For Sale
    I have a new Mopar Performance Super 60 with stainless steel oil and coolant lines for sale. Spec is as follow: Super 60 compressor wheel Polished TII .42 a/r compressor housing Stage 1 turbine wheel .63 Chrysler flanged turbine housing 2.5 inch swingvalve Big can actuator SS turbo oil line...
  5. Connecting rods

    Engine - Turbo & Block
    was wondering what the best value on connecting rods are for and 85 2.2L. I was thinking about going with the Forged Wiseco Pistons from turbosunleashed.com I also wouldn't mind some input on BOV's you guys are running. Its going from t1 to t2, I'm not sure how much boost I'll wanna run but if...
  6. GLHS parts for sale.

    Parts For Sale
    Csrt42011's uploaded images - Imgur Lets see if this works (2) GLHS Radiators w/Intercoolers $100 Each Plus Ship (4) Struts front and back was told fit minivan turbo $100 Plus Shipping (2) Turbo Fans $40 plus ship (4) Headlight switches $10 each plus ship' (2) Alternators unsure what they fit...
  7. GLHS parts for sale.

    Parts For Sale
    For Sale: Cant seem upload pics but Email me at [email protected] or text (570)730-6944 quicker response time. (2) GLHS Radiators w/Intercoolers $100+Shipping each (2) Used ALternators $40 +Shipping each (2) Fuel Rails...
  8. USA Daytona Shelby-Z G-body T2 intercooler part# 4226978

    Parts For Sale
    I did a little spelunking in my shed today and found what I believe to be a Daytona Shelby-Z G-body T2 inter-cooler. I Googled the part# 4226978 and nothing came up. I could use some help as to what years this puppy was used. If its been used it was very little. Paint looks great for...
  9. T2 rad/intercooler setup wanted

    Parts Wanted
    I'm looking for a good T2 radiator and intercooler to throw in my 88 Daytona. It would be nice if the fan is with it as well. I am also looking for the lower, long rubber intercooler hose, as well as the upper hoses if anyone has them.
  10. 87' shelby z rally

    Engine - General, Exhaust & Induction
    I'm going to be taking my daytona on a road rally in July of this upcoming summer. Rally North Americas rally route 50 to be exact. As this rally is 2000 miles long (not counting the trip to and home) and various track days are involved... What would people recommend me bringing for emergency...
  11. T2 Garrett Turbo

    Parts Wanted
    Looking for a working/good condition later style garret turbo (T2) No shaft play or oil blow by. I am going to SDAC 23 if deal can be made there otherwise I am from Wisconsin. -Dan
  12. 86 daytona cs auto drivetrain part out/t2 top end

    Parts For Sale
    Parting out the drivetrain on my 86 daytona cs auto.engine is dissmantled needs rings swirl piston head is 287 has small chip on side of one of collant ports also selling dealer installed top mount intercooler.all drivetrain/engine are for sale also have a turbo cam slider rockers slider lifters...
  13. lucille - My 1986 Turbo-Z C/S

    Project Log
    So lets start from the beginning. About two months ago i scroll through craigslist, find the regular tonas for sale ive seen for how long, then i scroll onto an ad never seen before. For an 86 turbo z, says the tires, hood, radiator, ac pump, alt, and engine computer are gone. Asked how much he...
  14. 91 Daytona Shelby T2 part out

    Parts For Sale
    Parting out damn near the entire engine minus the block(cant remove it) and head(cracked :( ) will remove as stuff sells, i love this car to death, but no $$/shop/time/working tranny forces me to sell. plus my dad wants it off his damn yard, so act quick because i'll need to call a scrapper to...
  15. Three wire connector by passenger side strut tower

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Hey guys just finishing up my t2 conversion on my 1987 dodge shadow, and I have found a connector that I don't know where it goes. The connector looks alot like the map sensor connector but is black with larger gauge wires going into it that are blue or have blue tracers, the connector is in the...
  16. Will a 1989 t2 minivan wiring harness work in a 1984 N/A Omni??

    Engine - Turbo & Block
    I realize this is probably a dumb question but I feel the need to ask it... I have a 1990 Omni that I was gonna convert to a T2 so Ive bought everything needed for the conversion but then I came into a 1984 Omni for next to nothing so I bought it just because... Then I started thinking rather...
  17. t1 garrett converted to t2 garrett waste gate rod too short??

    Engine - Turbo & Block
    I am in the middle of converting my 1987 t1 log shadow to t2 status, and after rotating the compressor housing and making an adapter to get rid of the 90 degree elbow on the inlet, and moving the waste gate far enough from intake so it will not hit, my waste gate actuator rod is almost 1/2"...
  18. Swaybar set up on a T2 Omni...

    Transmission, Suspension, Brakes, Tires & Wheels
    Well I finally have a lil extra money set aside for swaybars on my 1990 T2 Omni I'm slowly piecing together. The body is stock and only suspension upgrade so far is Kyb shocks and struts. My question is what is recommended for front an rear sway bars??? I am more than likely going with...
  19. Is a 1984 2.2 non Turbo block convertable to a T2??

    Engine - Turbo & Block
    My girlfriend surprised me with a salvaged Omni a while back and the only thing wrong with it is the crappy Holley Carb...Anyways long story short DMV in California is Impossible and price of a weber carb to make it run right is more than the car cost so I'm just non-opping it and Pulling that...
  20. Can I use an SRT4 wiring harness in an omni if I replace the CPU as well??

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Hi everybody, I have some questione about Wiring Harnesses... I have been putting together a turbo 2.2 1990 Omni and was just donated a bunch of srt4 components. I am about to start the re-wiring the omni so I started to wonder which computer/harness I can use. I know a minivan harness will...
Top