Turbo Dodge Forums banner

t3

  1. Engine Need 2.2 Spirit RT engine or short block

    Parts Wanted
    I am located in Columbus Ohio Searching for good 2.2L Spirit RT engine or good short block. My car is currently for sale on another thread, but I would much rather fix this car before I move. Please let me know if you have one for sale or know where to find one. Thank you-
  2. Turbo III valve install height

    Turbo III
    Just got done with complete valve job on a 91 TIII, looking for the valve install height spec. Thanks Jeff
  3. tIII cylinder head plugs

    Parts Wanted
    Looking for aluminum cylinder head plugs to remove the factory steel ones. 91 Spirit rt TIII engine
  4. USA Spirit RT crank needed

    Parts Wanted
    Looking for new or used 91 Spirit RT crank. Please PM me if you have one for sale or know where I can purchase one. Thank you
  5. Blown t3.... AGAIN

    Turbo Dodge Help
    Hi there, I'm having turbo issues again.. I had bought a garret t3 60mm turbo 2 years ago. Ran great at 14lbs for 12 months before the oil seal on the exhaust side blew and oil leaked straight into the swing valve and then puffed white smoke out the exhaust. Bought a rebuild kit through Garrett...
  6. 92 Chrysler Daytona IROC R/T Lotus T3

    TurboDodge Snapshots
    Hi dear TD friends, here are some pics of my 1992 Chrysler Daytona Shelby IROC R/T with Lotus 2.2 TIII engine, all original with only 37.000 "summer" kilometer :D
  7. Quick Holset question

    Engine - Turbo & Block
    I've got a freshly rebuilt hx35 turbo. . .for it to fit and flow right should i cut the flange off of my ported and polished exhaust manifold and replace it with the split style t3 flange or should i buy the bullseye housing that the dsm users are buying? Would the housing fit between the...
  8. 91 R/T turbo cutting out?

    Turbo Dodge Help
    When the turbo kicks in and I'm getting above, say, 3500 rpms, the car will just cut out. I speed up and it's like the turbo just stops, or the power cuts out. Has anyone else had this problem? Any help would be much appreciated! Thank You -Spencer
  9. WTB: dohc 2.2 manifolds

    Parts Wanted
    hey looking to see if anyone has and how much they'd charge for a stock intake manifold and a stock exhaust manifold for a dohc 2.2? they can be in any condition let me know thanks!
  10. Need t3 airbox and ductwork, Whole spirit shell

    Parts Wanted
    I just bought another 91 Spirit R/T, and the previous owner yanked the factory air cleaner and put on a stupid cone filter that just sucks hot air off the turbo. I need the filter box and bracket, clean air duct (from the computer to the filter box), and whatever goes between the filter box and...
  11. USA Map clamps

    Parts For Sale
    I found two left over map clamps from my turbo mini. Include instructions. $30 shipped/ea
  12. TIII parts wanted

    Parts Wanted
    Update.....unfortunately Looking for these parts used or unused new TIII ARP head studs TIII FWD Performance valve spring retainers Rocker arms 4 RH 1 LH I exhaust cam or a link to a repair shop Valve lifters Please message me the price if you have any of these parts or have a lead on them...
  13. Can I attach a srt4 head to a 1989 t2 common block??

    16v Conversion
    Ok so I am currently building a turbo Omni and am well on my way building a t2 thanks to all the advice from people here.(best staff in the business) today my friend informed me he has a whole mess of SRT4 parts I can use to build another motor...Is there a way or is it better to use a SRT4 head...
  14. T3 Turbo or Rebuild Kit

    Parts Wanted
    I'm greatly in need of a T3 Rebuild Kit with center housing & backing plate. I found the rebuild kit on Gpopshop.com, but I still need the center housing and backing plate. If anybody has one or knows where I can get one, without giving up my first born, please let me know. And have a Merry...
  15. Turbo Upgrade?

    Engine - Turbo & Block
    I have an '86 Laser automatic with the T1 turbo, and it is a little slugish. I was wondering if upgrading to a T3 turbo would help boost hp/torque, and if so, would it bolt-on or would there be modifications that I need to perform? Or are there other solutions to more hp/torque or anything that...
  16. BorgWarner EFR turbo

    Engine - Turbo & Block
    Hi all: I'm new in the turbo mopar scene, from when i was a young lad I always loved the look of the Daytona and admired it's ability. There was a guy who lived on my street who had a "stage IV" (so said the hood) daytona. I remember him giving a mustang such a smack one day....I never forgot...
  17. t3 and other parts for sale

    Parts For Sale
    t3 fly wheel, $50 bov and flange fwdp price is $220 +s/h im looking for $150 +s/h (sold) pass side, front and driver side motor mount from a 91 spirit rt. all are solid mounts. all 3 are $189 from fwdp (sold) t3 fuel rail with injectors and reg. $100 +s/h t3 rad ic combo (SOLD) t3 over...
  18. T4 on a 2.2

    Engine - Turbo & Block
    We all know that the t3 mounting footprint is an offset rectangle, not quite a perfect rectangle nor square. It would be simple to order a t4 with a t3 footprint (hybrid) if the rectangle were not offset as they were on the old garret airesearch turbos. The added cfm's of the larger turbo is...
  19. what turbo?

    Engine - Turbo & Block
    I have a 1989 caravan 2.5 turbo and I want to upgrade from the old turbo. almost every one I have e-mailed concerning turbos has told me to get a garett t25 but when ever I read about a t25 or t25BB or a t28 turbo they all say "makes up to 15 psi great for 1.6-2.0 engines" 2 problems there my...
  20. TIII Rebuild Pics!!!!!!!!!!!!

    Turbo III
    This is what I have been waiting for, for months and months. The TIII is finally out of the machine shop!!! You can probably tell from the pictures, but the head and manifolds have been ported out alot. Maybe not as much as some others but a good 1/8th of an inch if not more was taken out of the...
Top