Turbo Dodge Forums banner

temp

  1. Coolant temp sensor, stalling???

    Turbo Dodge Help
    Need HELP! 87 2.2 TBI Auto Aries. Randomly stalls or tries to, typically after engine warm up. Only code has been coolant temp sensor, which I’ve replaced twice now, both new Mopar units. However Does not always set code. Took all the wire loom off to inspect HEP wiring as well as temp...
  2. Gauges Install (Pics)

    Interior
    Got all my gauges installed. I'm pretty happy with how it all turned out. The gauges are: -Wideband -Mechanical Boost -Mechanical Oil Pressure -Mechanical Water Temp. -Voltage You can see on the first picture on the lower dash, above the drivers right knee, there is a potentiometer, so I can...
  3. The overheating problem came back >:[

    Turbo Dodge Help
    Last winter My thermostat stuck and i blew a head gasket. Over the winter/spring/half of summer i replaced the stat, head gasket, got the head resurfaced, added an intercooler, and replaced coolant temp switch. 3 days ago I got er running again and after about 3 miles of driving the temp gauge...
  4. air intake temp sensor location????

    Carburetted and TBI Injected
    Hi i got a 93 daytona 2.5l tbi i was wandering where the air intake temp sensor is located? its running rich and fouling out the plugs, scan tools says the sensor is at -189F.
  5. temp issues

    Engine - General, Exhaust & Induction
    Alright so I'm working on a 93 dodge shadow with a 2.5 non turbo. I replaced the cylinder head because mine was cracked in 3 places. I got the timing all set and all new fluids. I bought a new thermostat today, then I drove the car 130 miles home. While driving I noticed a few things. When I go...
Top