Turbo Dodge Forums banner


  1. Wtb: 87 t2 lm...

    Parts Wanted
    Anybody got one? I’ll buy it...
  2. Engine TII Pistons & Rods!!!

    Parts For Sale
    I have a set of floating T2 Pistons and rod assemblies for sale! Pistons are new Mahle's on Chrysler T2 rods P/N 4323958. They do have pins and locks, but No rod bearings or piston rings. Pistons were installed but never ran. Asking $200 OBO
  3. TII to VNT

    VNT & Other Turbo Vehicles
    Okay, my tii broke and i got a vnt in its place, ive since learned of more opinions on this swap and know most people wouldnt go this route for a mod. But i have it and i need to know how to make it work with a boost controller with a 89 daytona 2.5. Thanks in advance for any help
  4. Spark Plugs and Wires, educated opinions wanted

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Hey TD community, holy cow, it has been a while. I've missed you guys, life just kind of swept me along. TO THE QUESTION!! First, I know this is basic stuff, but understand that it's been so incredibly saturated, I could not find much useful information relatable to my application. Car: 1989...
  5. FMIC in 91 Lebaron. Need serious help.

    Engine - General, Exhaust & Induction
    This is my first post in the turbododge forum. Normally i can find everything i need, but i have ran across this problem---If i use a honda radiator so that i can use a same side inlet/outlet intercooler, is there anyway i can keep my air conditioning? This is my daily driver and i'd like to...
  6. Confirm my diagnosis

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    A little background - car is an '88 Daytona 5 speed, was originally a Mitsu T1, currently has an early garret T1 with the inlet adapter and the induction system from a T2. Also has Boost Button cal for 18 PSI. Has a vacuum manifold and the turbo does NOT have the nipple on the compressor...
  7. Dodge omni GLH-S Parts

    Parts Wanted
    Im in need of at least 1 fog light (cracked) I love to have an aluminum set of Louvers w/ rear wiper GLH hood grill or vent
  8. Rebuilding, seeking advice.

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    I melted a piston in my 1985 Daytona. I'm going to be rebuilding it here soon, and I have some general questions to lay on this wonderful community. I'm going to be getting new pistons and rods, so I was wondering what to go with there that can withstand allot of HP, something with detonation...
  9. GLH Hood

    Anyone out there have a 86 Dodge Omni GLH vented hood? The stock hood I recently bought a GLH late '10 just got it on the road nearly a year later but hood dont fit right despite it being a stock Dodge Omni GLH Hood.
  10. USA Cleaning shop, misc parts, engine, interior, exterior

    Parts For Sale
    Cleaning and organizing my pile-o-parts ive been collecting over the years. everything is OBO +shipping. Im also open to trades so offer away. T3 upper timing belt cover in great shape - 30 t3 snorkel with air box and k+n filter - 150 2 piece intake STOCK with fuel rail, fittings, and...
  11. How to hook up PCV Valve?

    Turbo Dodge Help
    I need some info on hooking up my PCV valve, I hooked it to my vacuum block and it idles up as if I have a boost leak. Should I just hook it directly to the intake or do I need some sort of orifice/check valve? If anyone has some info or pics of the pcv or whole vacuum setup I would appreciate.
  12. 4k idle

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    89 Dodge daytona Turbo II. It starts up and goes to 4k idle. Just did timing. All vac lines are good redid them. New tps. I dunno what it is anymore. Any help/advice would be appreciated very much. Thanks
  13. USA Misc wheels, grille, hood, TII airbox, NOS valve cover, A413 trans, turbos

    Parts For Sale
    SOLD15X6 crosslace wheels $50 prefer local pick up SOLD 86 Lebaron Headlight Bezels and grille in awesome condition SOLD 86 Lebaron Turbo vented hood in great condition (1 very small ding) SOLD 89 TII airbox with upper and lower hose & K&N air filter. Factory setup for BOV (like TC's) $50.00...
  14. How do I set timing on a TBI Cam???

    Turbo Dodge Help
    I installed a 2.2 t2 motor in my aries with solid lifters and tbi roller cam. The cam is set to tdc as well as the crank. The car runs alright but it seems to me the valves almost float or stick open because the car doesn't accelerate like it should, it seems to be fighting itself. Also when...
  15. Need a T II Comp

    Parts Wanted
    Looking for a stage II computer/ performance computer for a mostly stock 1989 Daytona T-II
  16. Idle stumble when cold

    Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    88 Shelby Z TII. When cold, it idles high as it should and comes down as it warms up. Thing is, when its cold and you give it some throttle and let off, it drops to about 400 rpm, tries to stall but doesn't, then recovers back to high idle. Its fine once its warmed up. What may cause this?
  17. Boost gauge reading more than its supposed too?

    Turbo Dodge Help
    I installed a vac block and vac lines and routed it for the T2 setup since thats what i have and now my boost gauge maxes out now at 20psi instead of 15psi. Should i not have my boost gauge line hooked up to my vac block? before it was ran to the silnoid by my map sensor.. should i run it to...
  18. USA T2 Intercooler

    Parts Wanted
    I have a leak and need a replacement. I want a stock T2 replacement or maybe something that will bolt right in place of it. Thanks
  19. Greetings from Oregon

    New Member Intros
    Hi I'm Paul. I have 88 omni that I'm in a process of swapping a t2 2.5 in and I decided to join this forum cause it is my 1st turbo car and I have lots of questions on conversion. I want to put manual boost control inside the car install boost gage where to put airfilter when using a intercooler...
  20. USA wastgate actuator

    Parts Wanted
    My spring in my actuator has gone week. I had to unplug the vac/pressure line to make boost but now it is down to 11psi, it must be the warm weather. Anyways i would like to replace it with a large canister style, but i really dont care. I hear that the small ones work like champs as well. I...