Turbo Dodge Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 18 Results
  1. Parts Wanted
    Hey, looking for one of those passenger side half shafts with the hanger/bracket that bolts to the back of the block, non-L-body. Need ASAP, if you have one. Thanks, Mark
  2. Turbo Dodge Help
    Bad news, just looking for any info from someone who’s been through this. Drivers side diff bearing on my old ladies 93 2.5L Auto Spirit started humming Sunday and started a little wobble today, verified the diagnosis after work today. Just wondering how long this things possibly got till it...
  3. Turbo Dodge Help
    The last 2 days in my 1992 Spirit N/A automatic has been downshifting from 3-2 very noticeably, almost feels like I'm doing it myself. Everything else seems normal, trans fluid is at proper level and looks good. Changed trans filter probably 20k miles ago. Any ideas or things to check?... thanks!
  4. Parts For Sale
    Afternoon Guys, Short and Sweet 89 A568 small spline i believe Case was damage and welded long ago. In great shape $450 Thanks, Mark
  5. Turbo Dodge Help
    So from what I've gathered, if I don't have external plug for a lock up solenoid, I don't have a lock up trans? Just wanna make sure, thinking about putting a new torque converter in while I have my engine out. 92 Spirit 2.5 NA 3 speed, the only plug I see going to trans is neutral safety switch.
  6. Parts Wanted
    I am searching for an A523, shifter, cable, and anything else I'm not aware of which will fit in an 87 Reliant (which IS automatic atm). I also need: - flywheel clutch assembly - starter pedal assembly - steering column All of this needs to fit together on this currently automatic car.
  7. Parts For Sale
    Selling my Stage 3 Werks transmission that has around 10,000 miles on it. No problems with this trans. I bought this trans brand new and these trans are cheap. Great up grade from stock trans and for those planning on putting down some serious power. For any more info u can message me or...
  8. Parts For Sale
    Parting out the drivetrain on my 86 daytona cs auto.engine is dissmantled needs rings swirl piston head is 287 has small chip on side of one of collant ports also selling dealer installed top mount intercooler.all drivetrain/engine are for sale also have a turbo cam slider rockers slider lifters...
  9. Parts Wanted
    I have a 87 Shelby z Daytona. I have owned the car since I was 17. It has been sitting for now for almost 10 years because the transmission is bad. I have recently rebuilt the engine but I still need a trans. It has an A555 in it but I will put whatever fits that's inexpensive. Im in Savannah...
  10. Parts Wanted
    im looking for a working A413 for my daytona for 300 or under local to 12589 or 300 max shipped thank you
  11. Turbo Dodge Help
    of a 2.2t with trans attached?
  12. Engine - Turbo & Block
    Which is easier to change rear main seal? Pull motor or transmission:shrug:
  13. Transmission, Suspension, Brakes, Tires & Wheels
    Hey yall, My a413 is having a very strange issue (I'ts in a neon, but should be the same I believe). Just got the car and got it running, and now found out the transmission is stuck in drive. When I mean it's stuck, I mean every position of the shift selector it will only go forward in drive...
  14. Turbo Dodge Help
    Stock 86 GLH, 81,000 miles..... Started making a slight noise under load today, after an additional 70 miles it has gotten significantly worse. Noise present when coasting nearly disappears when I press in clutch, grows exponentially when I add any amount of throttle. Occurs in all gears...
  15. Transmission, Suspension, Brakes, Tires & Wheels
    First off let me start by saying, I have read and re-read everything I could find on these trannies. Including Donovan's stuff and stuff from all around TD sites. This is my first auto car. It's an 87' T1 with the 3-speed. I recently installed a FWD-P stage-1 LM w/ 12lbs. On top of my existing...
  16. Turbo Dodge Help
    Do i have to change out my hubs because the c.v. axle seem like the splines are to large to fit into the spindle:bang head. If so how so i do it by getting a whole new spindle or can i have new ones pressed into the old spindle?:confused: Please help im so close to having my car back on the...
  17. Transmission, Suspension, Brakes, Tires & Wheels
    I have a Dodge Neon DOHC w/ automatic trans. When I first start it up in the morning and start to drive the 1st gear will shift ok to 2nd but then 2nd seems to wind out or lag or slip before going to 3rd. After the car is driven about a minute or two the slip goes away. What is the cause of...
1-18 of 18 Results