Turbo Dodge Forums banner
transmission
1-19 of 77 Results
  1. Turbo Dodge Help
    What's up fellas, My transmission off of my 83 Shelby Charger is making a clanking noise in neutral unless the clutch is pressed in, I'm assuming its the throw out bearing but I figure I would change the clutch while the transmission is out. Only thing is I've never a clutch or throw out...
  2. Transmission, Suspension, Brakes, Tires & Wheels
    2.2 T1 engine, and I was wondering what transmissions/transaxels, whatever, would work in the car, or with a T1. I was wondering if a 5-speed from a SRT-4 car would work, since what I’ve been told is that the ones that came in the cars couldn’t handle the torque the engines produced. anything...
  3. Parts Wanted
    If you know of anyone selling a built 3 spd transmission (clutch packs, lock up torque converter, etc) message me. Drive train is a SRT-4 turbo to a 31TH in an 88 GLH. Need lock up T.C. and parts for drag racing. Running 12 sec 1/4 mile on a 1 tire fire at 26lbs of boost.
  4. Parts For Sale
    I have a 94 Dodge Shadow with a junk 3.0 motor and 5-speed manual still in it. I drove the car right before the engine grenaded, and transmission was shifting fine. Will sell the whole car or just the tranny and I'll scrap the car. Asking 400 for the car, or 300 for the just the transmission...
  5. Transmission, Suspension, Brakes, Tires & Wheels
    Hey guys, Hopefully this video will help shed some light on how to set preload and endplay for your new LSD you may be installing into a transmission. In this video, I installed an OBX LSD into the A520. From what I understand, the basics of how to set the preload and end play of a FWD...
  6. Parts For Sale
    Afternoon Guys, Short and Sweet 89 A568 small spline i believe Case was damage and welded long ago. In great shape $450 Thanks, Mark
  7. Turbo Dodge Help
    So from what I've gathered, if I don't have external plug for a lock up solenoid, I don't have a lock up trans? Just wanna make sure, thinking about putting a new torque converter in while I have my engine out. 92 Spirit 2.5 NA 3 speed, the only plug I see going to trans is neutral safety switch.
  8. Parts Wanted
    Anyone have +40s new or used they'd be willing to sell for a halfway decent price? Need a clutch that can handle the abuse of 20 psi. Stage 2 & up preferred. Don't need each at once. Let me know what you got and lets work out a deal. Thanks
  9. Parts Wanted
    My cover plate is rotten and leaking fluid everywhere. :mad: Before attempting to repair the bad one I'd be thrilled to see if anyone had a cover plate in decent shape. Let me know, Thanks! Brian
  10. Transmission, Suspension, Brakes, Tires & Wheels
    When sitting still and the car is idling it will vibrate violently while in Drive. While in Park it is fine, as is Reverse, and neutral. However it does not vibrate when you throttle it up a little. Only when it is idling. While in gear and moving if you let off the accelerator it will start to...
  11. Parts Wanted
    I am searching for an A523, shifter, cable, and anything else I'm not aware of which will fit in an 87 Reliant (which IS automatic atm). I also need: - flywheel clutch assembly - starter pedal assembly - steering column All of this needs to fit together on this currently automatic car.
  12. Maryland/DC
    Please PM me :) Thanks
  13. Transmission, Suspension, Brakes, Tires & Wheels
    Hello fellow turbo dodge users, I'm rebuilding my 1989 dodge Caravan 5 speed and i want to do a street clutch, what was in the car was a T2 disc and T3 pressure plate. The person i bought the car from said it only had about 10,00 miles on it. I would like to either buy a new setup of the same...
  14. Parts Wanted
    Hey there, I'm not 100% sure what transmission is even in this car. It's a 1985 Shelby Charger with the 2.2L turbo. I'm thinking a525 or a555? not sure though :/ My mechanic says that its my rear differential that went out in this. It can be bought brand new for about $2000 but I definitely...
  15. Parts For Sale
    Selling my Stage 3 Werks transmission that has around 10,000 miles on it. No problems with this trans. I bought this trans brand new and these trans are cheap. Great up grade from stock trans and for those planning on putting down some serious power. For any more info u can message me or...
  16. Transmission, Suspension, Brakes, Tires & Wheels
    so recently i have put a hole in my differential in my 85 daytona i was wondering what transmisson could be swaped into it like a new one that maybe is stronger better idk im pretty sure that the 2.2 is pretty much all the same thur many years but im not sure. so if any one has a tranny that is...
  17. Transmission, Suspension, Brakes, Tires & Wheels
    Hello, I am currently rebuilding a 1986 Shelby Omni that is projected to put out around 300hp. I am putting a 3-speed automatic a413 into the car because I drive with hand controls. That being said, what is the best way to rebuild the a413 to ensure that it will not crumble behind the 300hp...
  18. Transmission, Suspension, Brakes, Tires & Wheels
    Hey guys, I have a 90 tona with the a523, I lost my tans bell to block bolts so a buddy brought some. Is there any specific way the bolts go ? does someone have a diagram or could somebody tell me wich bolt first from the very bottom. The car has been sitting for 6/7 months and my memory is...
  19. Transmission, Suspension, Brakes, Tires & Wheels
    I am looking to convert my 1986 GLHS from its manual a555 to a semi-automatic or automatic transmission. I am in a wheelchair and use hand-controls to drive and am therefore not allowed to drive any car with a manual clutch. Any advice on what might be the best fit and most reliable for a...
1-19 of 77 Results
Top