Turbo Dodge Forums banner
vacuum diagram
1-6 of 6 Results
  1. Turbo Dodge Help
    I'm at my wits end. )-: I bought an 89 LeBaron Convertible 2.5 Turbo 1 with a multitude of problems, mostly related to mistakes by the previous owner. Timing was off by a tooth, and after who knows how many miles, all four pistons were cracking and chunks were falling off. I did a nearly...
  2. Turbo Dodge Help
    hi guys i have a 1987 shelby charger T1 with a mitsu turbo im confused which vacuum diagram i should be looking at to plumb in the wastegate the 87 one says to run vac to the solenoid and then the line to the wastegate, but ive been reading thats for a garrett? should i be looking at an 88? it...
  3. Exterior
    Getting a reproduction Turbo II vacuum diagram sticker (the square one on the underside of the hood) made for my Daytona Shelby Restoration. I scanned one I cut out of a spare garbage hood, scanned and then reproduced it to the best of my ability with photoshop so it was nice, crisp and clean...
  4. Turbo Dodge Help
    I'm wanting to create our own vacuum diagram html page(s) that would reside on this web site. I will create it the index page and proper link. Then I will need to turn it over to some one for finish it up so the look and feel looks like our pages. What do you think? Would it be a waste of my...
  5. Engine - General, Exhaust & Induction
    I have a 89 Shelby Daytona and the vacuum lines are ALL messed up(previous owner) and I've seen some custom vacuum setups that I'd like to try out. I just want to know how to put that little aluminum vacuum block on and make the engine run like stock. by the way its a 2.2 turbo II setup. please...
  6. Engine - General, Exhaust & Induction
    Hey all, Im just tryin to get my car to idle right. I might need an ecu, but im trying to get the rest of the vac lines perfect and rule those out. What exactly needs vacuum? Ill just give you an outline of what I have hooked up, and you guys correct me if anythings wrong. The left port on top...
1-6 of 6 Results
Top