Turbo Dodge Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Parts Wanted
    Hey Guys, I am looking for a decent condition 1986 GLH-S starter. The starter and heat shield on mine are not the OE parts and I keep cooking the wires going to the starter so I want to do it right this time. Bonus, if anyone has an entire wiring harness that would also be welcomed even if not...
    $150 USD
  2. Electrical
    Hello everyone, Lately I started preparations on my 2.5 turbo engine swap to 92 NA Daytona. The engine(92) and the transmission(probably A568) are ready, but I still need a wiring harness, ECU and other components. I would’ve some questions about those : Can these parts be borrowed from other...
  3. Turbo Dodge Help
    Hello all, I need some help on swapping a TII 2.2 into a '93 body as the white car is rusting away and did't make it through the inspection test. On the left my current '89 TII (with spare front spoiler off the T1 due to small accident), very ugly.. I know. In the back a red '93 T1 that only...
  4. Project Log
    Hello everyone, let me start off by saying I'm pretty new into the car world and working on cars in general. I know a lot of the plug and play stuff but getting down to specifics and certain part names I'm still kinda iffy on so thank you for your patience and understanding in advance 🥲 I just...
  5. Turbo Dodge Help
    Hey everyone, Looking to identify this SBEC and wiring loom! Not even sure if they are a pair, I only assume so. I was considering using the loom for a Power Distribution Center upgrade on my Omni build since i thought it was the proper '90 lebaron one... However, the Power box was different...
  6. Turbo Dodge Help
    I need a picture of the throttle body wiring harness routing on a 1987 Daytona Shelby TII with the two piece intake. I assume there is supposed to be some sort of bracket on the intake with a clip or clamp for the IAC and TPS wires. I know what the 1988 up turbos use, but the TB mounting studs...
  7. Parts Wanted
    Anyone have a wiring harness for a 88 Turbo Shadow? I want to convert to SMEC in my CSX since I have a bad azz Programmable SMEC. I need the engine bay harness that plugs in under the dash and goes forward. I'm not sure if the 89 T1 shadow is the same or not as far as plugs under the dash...
  8. Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios
    Hi everybody, I have some questione about Wiring Harnesses... I have been putting together a turbo 2.2 1990 Omni and was just donated a bunch of srt4 components. I am about to start the re-wiring the omni so I started to wonder which computer/harness I can use. I know a minivan harness will...
  9. Parts Wanted
    i have an 89 dodge daytona es with a t1 and the wiring harness was butchered before i got it. it has several broken spots and bad fuseable links so i am looking for a replacement.
  10. Parts Wanted
    swapping engines making Daytona into a Turbo I, looking for engine bay harness. :bang head
  11. Parts Wanted
    hey guys i havent been on for about a half a year now and i havent been around my car for that long either i need a injector wire harness for my 91 shadow i was looking a while back and never came across one
  12. Parts Wanted
    wanting 85-87 glht or shelby charger wiring harness. needing complete under hood wiring for turbo L body. doesn't have to have computers i got a couple. thanks, Bud
  13. Parts Wanted
    i badly need a complete srt-4 wiring harness, i could get by with just the engine wiring harness but would love to have the entire vehicle.
1-13 of 13 Results