Search Results for ‘wiring’

So currently I'm at an 85 "GLHS" LM and I'll be making the switch to the later "Daytona" module. I've figured out the TPS, but I'd like some help with the MAP sensor wiring since the sensor is not mounted on the LM. on Mr. Donovan's forum, he does not have it listed or shown. If someone could...

Hi there, I have a 89 Daytona es turbo that got hit and totaled, so I bought a 91 Daytona es v6 to swap the engine into. I tried to find a turbo 2.5 wiring harness but I could not. So my plan is to rewire the v6 harness to work with the 2.5 turbo. I bought a stage 2 computer for a 91 from fwd...

When comparing several fuel pump assemblies, I noticed that the wiring to the main connector (on the hanger) is sometimes backwards. Since the wiring harness on the car should be right, why do some have (+) and (-) reversed on the hanger? Even if (+) and (-) are incorrect on the hanger, they...

I am in need of a wiring harness diagram for my 89 turbo shadow. i have to make my own injector harness and i am stumped on where each wire goes. if anyone can help i would appreciate it.

I just recently bought an autogage tach # 233904 and was reading the instruction I understand it all completely but just have a few question like how do I fuse the red wire for the 12v ignition switch? I know I have to clip two wires to calibrate it to work on a 4 cylinder,and any idea where I...

Im new to this older dodge 4 cylinder scene. Ive been into neons now for over 7 years and bought a running automatic 85 dodge omni the other day to swap. I want to put a stratus 2.4 liter out of my neon down in this car. I would like to do transmission, motor and all. I have megasquirt if...

I have to do a a computer and harness swap in my 92 spirit auto 2.5 TBI, I'm putting in a T1 computer and harness, just wanted to know if there were anything I should know or be aware of? Anything tricky? Or pretty straight forward??? Thanks in advance for any info or tips!!!

Ok 92 spirit tbi auto, I'm actually keeping it N/A but going to use a flex fuel spirit computer and intake, fuel rail, fpr, and injectors. But for all intensive purposes we'll just say TBI to T1 because I know it's been done. My question is; is there anyway to wire in the injectors to my 92 tbi...

I'm currently converting my 89 3/4 ton dodge from a TBI to a carb. We have traced out all of the wires, figured out the auto shut off relay and have power to my coil. But, the orange and grey wire that feeds into the distributor is where I'm stumped. The orange wire is hot. But we can't get a...

Hi everyone I need some help! I recently purchased a 1987 Dodge Daytona Pacifica 2.2 Turbo. The car needed a alternator and the previous owner bought one from ebay but never it installed it. It also needed a battery so I bought a good used one from advanced auto. Okay on the back of the...

I have an 1983 Rampage and a complete low mileage 1988 dodge 400 turbo...and want to put the turbo motor in my Rampage> do they make conversion wiring or should I use all the wiring from the 400? Nice website!

ok so heres what ive done to fix the problem i put in a new relay for the starter i have replaced the harness going down to the starter from the battery i replaced the starter and battery but the car just clicks wont turn over wtf is going on with this damn thing its just problem after problem i...

here are the problems I'm having (ofcourse it wouldn't be easy).... The wiring for the injectors does not match the stock connector.... What should I do??? Next problem: This is how I THOUGHT the turbo was supposed to go back on... Obvisouly I was wrong b/c the outlet is hitting the...

Alright.. So I've searched a whole lot of old forums for help on this subject but there is so much of mixed solutions I'm unsure of what one to, or how to do this. Basic history on whats going on. I've had an 86 Turbo Z for 5 years now. Bought it from the original owner and it is 100% stock...

Hey guys does anyone have the wiring diagram for an 89 daytona es cuz I spliced the wires to put on a new plastic connector thing and I don't remember which wire connects where. Thanks

My Daytona has something wrong with the turn signals , I have the original Daytona , Lebaron cluster but when i put my turn signals on they only work if i hold the switch back like as if i were turning my high beams on , they also work sometimes the way there supposed to but only when its cold ...

I know this isnt a turbo dodge car(as of yet) ;) but My 1973 charger recently burned up four wires in the wiring harness. My old starter wasnt working right so I had to keep jumping(ground it out with a screwdriver) the solenoid to get the car started. I was parked at a restaurant one day and...

Has anyone done a analogue to digital instrument cluster swap on an '86 daytona? Or does anyone have the diagrams for both clusters?:confused:

Hello everyone i am currently in the process of working on an engine swap from a 1987 daytona shelby z To a 1983 rampage. From what I have read the easiest way to do the swap would be to find a GLH or GLHS... can other people confirm this? Also I have everything from the daytona including...

Hey everybody I have a request for you, could people with T2 cars that are running put up some pictures of their engines installed so I can try and figure out what wires go where. I will post pictures tonight of the wiring harness and there is 50 points a connector if people can tell me what it...