Joined
·
69 Posts
ne body have any web sites that shows how to do a neon DOHC in my 86 daytona ?
16v conversion
Join the discussion
Recommended Reading
-
2.5L 16v interference or not?
16v ConversionHey everyone, I found a Daytona IROC T3 with a bad bottom end. I have a good 89 2.5 L common block sitting in my garage. I know that if you use the neon had with a 2.0 cams, it would be a non-interference motor. but does the same apply to the Lotus head? I can't seem to find...- 3
- 161
-
Viper9087 · updated
-
2.5L TIII conversion
16v ConversionHello, What parts are required for a 2.5L TIII conversion beside the head and manifolds. I read : - 2.5L custom pistons, - intermediate shaft sprocket, - passenger side mount, Can I run the stock electronics, will the distributor hit the intake ? If I use TIII electronic, what parts do I need...- 6
- 1K
-
nvysion · updated
-
87 yorker 16v build
16v ConversionI have had my 87 New Yorker for 3 years and now its time for a face lift! The motor will be a 89 2.2 common block with a 2.4 turbo PT cruiser head. Hoslet HX30w for the turbo, custom intake and exhaust manifold. First I had to get rid of the only cancer on the car on the floor boards...- 46
- 12K
-
Question that wasn't covered.... Spark Plugs
16v ConversionI've searched and I can't see exactly which spark plug people are using I'm assuming it's the neon one but I wanted to double check before I went out and bought a set :bash:- 12
- 2K
-
2005 PT cruiser moto/transmission and wiering swap?
16v ConversionI fell out of things year back. Has anyone successfully had a running 05 motor, 5spd trans and electronics out of a PT cruiser?- 0
- 355
Join now to ask and comment!