Well I've got the seat tied down with some cable, it still ought to be welded, but it doesn't lean back or wobble while you're driving.
1986 Dodge Daytona Turbo Z C/S - $4000
Category: Domestic
Status: Clean Title
I have a 1986 Dodge Daytona Turbo Z C/S for sale, in USA - Oregon.
Mileage: 165000 miles
Engine Size: 2.2T
Asking price is $4000
I'm moving to California and I can't take my baby with me, so I've got to sell before I leave Portland, OR. She's a 1986 Black on Black Turbo Z with the C/S package, manual, and tons of upgrades. About 165k miles, but had the engine rebuilt and significantly upgraded about 50k miles ago.
In terms of Engine upgrades, during the rebuild she got the Turbo II intercooler and intake, the 3.0L throttle body and 2.5L injectors. She was upgraded with the Mopar performance computer to run it all at 14psi (still have the original ECU too.) She also has a Flowmaster muffler and 2 1/4 exhaust with High-flow cat. She aces the emmissions test here in Oregon, runs very clean.
The suspension started with the C/S package but has since got an oversized Rear Sway Bar, KYB shocks and springs. The entire frame was blueprinted and balanced.
The rear axle is out of an 89 Lebaron as are the brake master cylinder and the proportioning valve in order to run the four wheel disk brakes.
The interior is in very good condition, the front seats show a little cracking, but no tears and I put in a Panasonic CD player. Comes with two boxes of miscellaneous spare parts.
I've done a lot to fix her up from the previous owner, but she does still have some flaws. She needs a paint job and the front left attachment of the front seat (to the motorized carriage) broken, the seat is firmly cabled down, but probably ought to be welded.
You guys get first-dibs, if I can't find a buyer I'll have to take her down to Cali to find a buyer
Send me a PM or e-mail if you're interested.
Status: Clean Title
I have a 1986 Dodge Daytona Turbo Z C/S for sale, in USA - Oregon.
Mileage: 165000 miles
Engine Size: 2.2T
Asking price is $4000
I'm moving to California and I can't take my baby with me, so I've got to sell before I leave Portland, OR. She's a 1986 Black on Black Turbo Z with the C/S package, manual, and tons of upgrades. About 165k miles, but had the engine rebuilt and significantly upgraded about 50k miles ago.
In terms of Engine upgrades, during the rebuild she got the Turbo II intercooler and intake, the 3.0L throttle body and 2.5L injectors. She was upgraded with the Mopar performance computer to run it all at 14psi (still have the original ECU too.) She also has a Flowmaster muffler and 2 1/4 exhaust with High-flow cat. She aces the emmissions test here in Oregon, runs very clean.
The suspension started with the C/S package but has since got an oversized Rear Sway Bar, KYB shocks and springs. The entire frame was blueprinted and balanced.
The rear axle is out of an 89 Lebaron as are the brake master cylinder and the proportioning valve in order to run the four wheel disk brakes.
The interior is in very good condition, the front seats show a little cracking, but no tears and I put in a Panasonic CD player. Comes with two boxes of miscellaneous spare parts.
I've done a lot to fix her up from the previous owner, but she does still have some flaws. She needs a paint job and the front left attachment of the front seat (to the motorized carriage) broken, the seat is firmly cabled down, but probably ought to be welded.
You guys get first-dibs, if I can't find a buyer I'll have to take her down to Cali to find a buyer
Send me a PM or e-mail if you're interested.Attachments
- Status
1 - 15 of 15 Posts
1 - 15 of 15 Posts
- Status
