Category: Domestic
Status: Clean Title
I have a 1987 Chrysler Lebaron for sale, in USA - Colorado.
Engine Size: 2.2
Asking price is $1,800 obo, nego
I'm selling my '87 Lebaron premium coupe. The body is decent but needs fenders because the last owner never took the bra off of it and the fenders developed rust at the bottoms. The silver paint has the typical fading and peeling but the interior is beautiful; all leather with almost no damage to the driver's seat.
The car currently wears Eibach lowering springs and Koni shocks and struts. The wheels are stock 'buzzsaw' alloys and the tires are trash. The car doesn't currently run because it's in the middle of a manual transmission swap that was never completed (thanks, Gary).
Included with the car are two extra engines and an enormous pile of parts, mostly engine rebuild stuff:
"G" head, partially ported, valves and seats removed
TII intake with wiring and injectors and three extra tops (I have no idea why)
TII intercooler
early style reman water pump
two timing belts, one suare, one round tooth
fresh ground crankshaft by Colorado Crankshaft, turned .010/.010
new 3" catalytic convertor
set of pistons, Badger for 3.464" bore
new set of ERW lifters
new set of Wolverine solid followers
new set of NAPA valve springs
new set of Manley valves (stock diameter, I believe)
new oil pick up tube
new oil pump
new turbo drain tube
new thermostat, 90 degrees I believe
new throttle body, 52mm I believe
four forged rods from TII engine
8mm spark plug wires on cap
strut tower connector, looks new
used Bitsosushi BOV
TI block
TII block, spun rod bearing, may or may not be junk
stock TII crankshaft from above engine, badly scored, may or may not be junk
stock oil pan for TI
Chrysler turbo valve cover
header professionally made from 2.5 exhaust manifold, originally listed under parts for sale
center console for manual transmission swap
lots of other used parts, nuts, bolts, etc
The car is at a friend's house and I don't yet have any pictures of it, so I included three pictures of the stuff that the car comes with. I will get a few shots of the car itself shortly.
I'm willing to negotiate the price of everything but I don't want to separate the lot or sell anything individually; this is all or nothing. I know what I paid for everything and I know what it's all worth so any and all low-ball offers will be gleefully ignored. Receipts for most of the parts and work will be included.
Call Jim at (303) 680-3246 home, please don't leave message here or (720) 434-9425 cell, please leave message here
Status: Clean Title
I have a 1987 Chrysler Lebaron for sale, in USA - Colorado.
Engine Size: 2.2
Asking price is $1,800 obo, nego
I'm selling my '87 Lebaron premium coupe. The body is decent but needs fenders because the last owner never took the bra off of it and the fenders developed rust at the bottoms. The silver paint has the typical fading and peeling but the interior is beautiful; all leather with almost no damage to the driver's seat.
The car currently wears Eibach lowering springs and Koni shocks and struts. The wheels are stock 'buzzsaw' alloys and the tires are trash. The car doesn't currently run because it's in the middle of a manual transmission swap that was never completed (thanks, Gary).
Included with the car are two extra engines and an enormous pile of parts, mostly engine rebuild stuff:
"G" head, partially ported, valves and seats removed
TII intake with wiring and injectors and three extra tops (I have no idea why)
TII intercooler
early style reman water pump
two timing belts, one suare, one round tooth
fresh ground crankshaft by Colorado Crankshaft, turned .010/.010
new 3" catalytic convertor
set of pistons, Badger for 3.464" bore
new set of ERW lifters
new set of Wolverine solid followers
new set of NAPA valve springs
new set of Manley valves (stock diameter, I believe)
new oil pick up tube
new oil pump
new turbo drain tube
new thermostat, 90 degrees I believe
new throttle body, 52mm I believe
four forged rods from TII engine
8mm spark plug wires on cap
strut tower connector, looks new
used Bitsosushi BOV
TI block
TII block, spun rod bearing, may or may not be junk
stock TII crankshaft from above engine, badly scored, may or may not be junk
stock oil pan for TI
Chrysler turbo valve cover
header professionally made from 2.5 exhaust manifold, originally listed under parts for sale
center console for manual transmission swap
lots of other used parts, nuts, bolts, etc
The car is at a friend's house and I don't yet have any pictures of it, so I included three pictures of the stuff that the car comes with. I will get a few shots of the car itself shortly.
I'm willing to negotiate the price of everything but I don't want to separate the lot or sell anything individually; this is all or nothing. I know what I paid for everything and I know what it's all worth so any and all low-ball offers will be gleefully ignored. Receipts for most of the parts and work will be included.
Call Jim at (303) 680-3246 home, please don't leave message here or (720) 434-9425 cell, please leave message here