Got a 89 turbo harness/smec in a 87 non turbo new Yorker ( I didn't do it)
Ran good for 6 months, randomly died a couple times then restarted. Then, a final time, didn't restart
Found no ground signal ( blue/yellow stripe wire) from computer to asd/fuel pump relay. I wired in a relay to ground it, and drove another 20 miles, then it died again. Took smec apart, SEEMS burnt on one component.
Checked powers/ground to smec, all ok. Installed used SMEC from 89 turbo lebaron. Ran about 15 miles, then lost that ground signal again. Will start if I ground that blue/yellow wire. I've been told to inspect molex pins, how do I do this?
What am I missing? Can anyone tell me through a pic what the component that is possibly damaged, runs?
TIA
Ran good for 6 months, randomly died a couple times then restarted. Then, a final time, didn't restart
Found no ground signal ( blue/yellow stripe wire) from computer to asd/fuel pump relay. I wired in a relay to ground it, and drove another 20 miles, then it died again. Took smec apart, SEEMS burnt on one component.
Checked powers/ground to smec, all ok. Installed used SMEC from 89 turbo lebaron. Ran about 15 miles, then lost that ground signal again. Will start if I ground that blue/yellow wire. I've been told to inspect molex pins, how do I do this?
What am I missing? Can anyone tell me through a pic what the component that is possibly damaged, runs?
TIA