Turbo Dodge Forums banner
1 - 2 of 2 Posts

·
Legendary Driver
Joined
·
11,022 Posts
But at WOT the computer actually ignores the map sensor and goes off a predetermined table...

No, the ECU uses the map all the time to determine fuel off tables in the code. What it does ignore at wot is the o2 sensor.


On the masi 16V intakes, they actually had to run vacuum barbs off the bottom of the plenum for packaging reasons. Their solution was to run tubes inside the fittings to extend out of the floor.
Keep at it, you're making progress!
Todd is still teaching me stuff after 22 years with these cars
 
1 - 2 of 2 Posts
Top