Turbo Dodge Forums banner

1 - 13 of 13 Posts

·
Registered
Joined
·
1,549 Posts
It is very difficult to over do it when it comes to our blocks with an 8v head. The CB's are very strong.
 

·
Registered
Joined
·
1,549 Posts
turbovanman said:
Rods will easily with ARP bolts! So will the pistons with the right calibration!
But a lot of us know...there is a VERY small margin of error with stock cast pistons :-o

I have two pistons that will attest to that ;)
 
1 - 13 of 13 Posts
Top