Turbo Dodge Forums banner
1 - 1 of 5 Posts

· Registered
971 Posts
If your aftermarket wheels are 7" wide, I might be concerned about contact with the strut from the tire sidewall even with a +38mm offset. Don't quote me on this (as its been sometime since I last looked at the spec stamped into my Turbostars) but I believe they are +26mm and they are a 6" wide wheel with 205's on them and there is little clearance between the inside wall of the tire and the strut. A test fit would be in order....:)
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.